TeamTalk

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   Ballast (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=60)
-   -   Added pump to existing swith and wiring, runs 5 seconds and stops (http://www.mastercraft.com/teamtalk/showthread.php?t=55945)

HartlandX1 07-14-2013 08:23 AM

Added pump to existing swith and wiring, runs 5 seconds and stops
 
2007 x1 originally had two rear pumps. Had a third switch that wasn't being used but was wired. Added a third pump and connected wiring. When I run the pump it works for 5 seconds then shuts off and the light blinks. I know there is water pumping for those 5 seconds because I have quick disconnects and pumped water out for those five seconds. Brand new pump. Any ideas? Thanks

hughes26 07-14-2013 08:39 AM

Does the 07 have timers for the pumps like the newer models?
Might be as simple as extending the timer for the 3rd pump.

HartlandX1 07-14-2013 08:48 AM

Quote:

Originally Posted by hughes26 (Post 956754)
Does the 07 have timers for the pumps like the newer models?
Might be as simple as extending the timer for the 3rd pump.

Yes it does. How do I do that?

hughes26 07-15-2013 10:52 PM

I'm not sure on an 07, but I'm sure someone in this forum does.

JRW160 07-16-2013 01:57 PM

http://www.mastercraft.com/teamtalk/...st+timer+reset


All times are GMT -4. The time now is 04:29 AM.