TeamTalk

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   Upholstery (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=28)
-   -   2001 X-Star Bow Filler Cushion (http://www.mastercraft.com/teamtalk/showthread.php?t=55429)

Buxsquad 06-24-2013 11:38 PM

2001 X-Star Bow Filler Cushion
 
Can I get some help from anyone with 2001 X-Star or equivalent making template from their plastic cover that goes under the bow filler cushion. Lost mine in transit day I bought boat 7 years ago and I have never worried about it but now with 2 young kids it would be nice to use that cushion but hate to spend $100 on piece of plastic from dealer! Thanks.

TOO-TALL 06-24-2013 11:48 PM

I'd get a sheet of this stuff. I'd use 3/4 and cut it out yourself.I made a motor cover base for my 03 X2.Very strong and has held up great.

http://freckleface.com/shopsite_sc/s...lenesheet.html

Buxsquad 06-25-2013 08:38 AM

I actually have a sheet of something very similar ready to be cut...was just hoping to get a "template" so I could get an exact fit. Thanks.

76S&S 06-25-2013 08:50 AM

I would just trace the pattern onto the poly and cut, leaving a little extra where you can sand it to fit snugly. Mine appears to be made of 1/2.

homer12 06-25-2013 10:05 AM

You could trace on cardboard and make a template?

02ProstarSammyD 06-25-2013 12:32 PM

I used plotter paper, taped it above, and shined a light from underneath to see the outline.

Buxsquad 06-26-2013 08:21 AM

Thanks plotter paper is great idea!

willg 07-02-2013 06:31 PM

I have the starboard piece from my boat, how would you like me to make a template?


All times are GMT -4. The time now is 11:28 PM.