TeamTalk

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   Engine / Drive Train (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=24)
-   -   gearbox swap zf for borg warner (http://www.mastercraft.com/teamtalk/showthread.php?t=55216)

munkymush 06-17-2013 11:44 AM

gearbox swap zf for borg warner
 
hi, does anyone have any info on wether the bell housing off a zf45 will fit a borg warner 71also are the transmission mounting holes the same ? im totally *****d off with the zf/hurth rattle in neutral and low revs ..so im looking to swap it .. thanks

CantRepeat 06-17-2013 12:11 PM

1 Attachment(s)
Quote:

Originally Posted by munkymush (Post 947417)
hi, does anyone have any info on wether the bell housing off a zf45 will fit a borg warner 71also are the transmission mounting holes the same ? im totally *****d off with the zf/hurth rattle in neutral and low revs ..so im looking to swap it .. thanks

I don't know if they are the same bolt pattern or not, sorry.

But, do you know if your trans has trans fluid or motor oil in it now? There is a service advisory about the noise and the suggested fix is to change to motor oil.

munkymush 06-17-2013 12:21 PM

ive tried it on both eng oil and atf ..its workin fine just gets right on my nerves rattling at idle.. so im thinking if a borg warner goes in ill just change it over ..ive never had any noise or problems with them before ..has anyone ever found out why these zf boxes actually rattle or if its curable?


All times are GMT -4. The time now is 09:08 AM.