TeamTalk

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   General Discussion (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=6)
-   -   X30 anchor (http://www.mastercraft.com/teamtalk/showthread.php?t=55103)

Scott 06-13-2013 04:41 AM

X30 anchor
 
Ok, there are enough x30s' out, to ask this question. Has anyone found
The correct size, to fit, in the actual anchor location???

KahunaCraft 06-13-2013 06:36 AM

Yes, I'll take a shot of mine with measurements for you. See if I can find the model #.

Scott 06-13-2013 06:40 PM

Any info would be greatly appreciated!!!!

Trout 06-13-2013 07:38 PM

I put a box anchor inside mine but of course that folds pretty flat!
It's a small box anchor and collapsed its like 25" long
I'm out of town on business otherwise I would snap a pic

uplander 06-13-2013 10:05 PM

where is the anchor location

KahunaCraft 06-13-2013 10:23 PM

The very front cushion, right behind it. Got busy tonight, tomorrow for sure.

uplander 06-13-2013 10:57 PM

I have mine under the driver front cushion inside a Akro Bin, it is a hook anchor

thanks Kahuna for location

Specter 06-14-2013 06:25 AM

3 Attachment(s)
Scott - I posted this in your first thread about the anchor. Let me know if you need more info.

Scott 06-14-2013 06:21 PM

specter, I completly lost track of my first thread!! Hate it, when i do that. So if i can find one thts 18 in by 17 in, it should fit, upside down... thats better than not having one, i reckon...;)

uplander 06-14-2013 09:47 PM

so to get it out do you need to pull out both side cushions first and then pull out front cushion


All times are GMT -4. The time now is 04:02 AM.