TeamTalk

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   Engine / Drive Train (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=24)
-   -   Carburetor question (http://www.mastercraft.com/teamtalk/showthread.php?t=54349)

Bluccous 05-16-2013 06:02 PM

Carburetor question
 
I have a question about the secondary side of the carb. It is a standard marine Holley 600 with electric choke. The motor is running and idling good, but the back barrels don't seem to be opening up. I have taken the rpm's to 4000 on the trailer but still not opening. Not sure what is going on . Any help appreciated!!

thatsmrmastercraft 05-16-2013 06:17 PM

They won't open up unless the engine is under load. You won't be able to get the vacuum low enough without doing some damage to your engine. If you are suspecting that they aren't opening, you will need to do an on the water test with the engine cover open or off to see.

thatsmrmastercraft 05-16-2013 06:18 PM

If the secondary diaphragm is bad, it won't open at all.

Bluccous 05-16-2013 06:34 PM

I was thinking that but wanted to ask for sure. Thanks!

thatsmrmastercraft 05-16-2013 08:59 PM

Quote:

Originally Posted by Bluccous (Post 936334)
I was thinking that but wanted to ask for sure. Thanks!

No problem.......that's what this place is all about. Well, that and pictures. :rolleyes:

markismm 05-17-2013 11:35 AM

You can make them open up manually through the use of compressed air. See this link which is helpful in diagnosing your problem in the driveway.

http://www.chevyhiperformance.com/te...ary_operation/

1988prostar190 05-23-2013 09:40 PM

also if your piont distance is off the timing will be off which doesnt give the cycle enough vacume to open the rear barrels, this was just set up von my boat. Mine was a quick fix in the rotar cap


All times are GMT -4. The time now is 03:01 PM.