TeamTalk

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   Trailers (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=27)
-   -   Need new spacer/bushing for Fulton jack (http://www.mastercraft.com/teamtalk/showthread.php?t=54147)

Lars 05-07-2013 10:40 PM

Need new spacer/bushing for Fulton jack
 
3 Attachment(s)
Was hooking up my trailer today and the wheel was stuck in the dirt. I pulled it towards the truck and it just sort of gave out. It's the stock jack on an 04 trailer.

The good news is the jack is fine, and so is the bolt it is mounted on; it appears that the spacer between the jack and the bolt it is mounted on just gave way. I've attached what was left of the spacer.

Does anybody know where to source something like this? I checked the hardware store and fulton's website wasn't much help. I'm imagining this is some custom piece for Mastercraft Trailers.... :confused:

Any help appreciated! trailer is now sitting on a block of wood.

Attachment 94642

Attachment 94643

Attachment 94644

I think this could be what I need, but I don't know what length I'd have to cut it to, looks like about half inch..
http://shop.weldtab.com/product.sc?p...1&categoryId=9

JohnnyB 05-07-2013 10:46 PM

Do a search on here....there is an adapter plate and beefier Fulton jack that is worth every penny....

Sent from my Motorola RAZR MAXX using Tapatalk 2

Lars 05-07-2013 11:06 PM

yeaaahhhh but I move the boat twice a year and the jack itself is fine. If i can get away with a 5 dollar spacer I see no reason to upgrade! (yet....)

Lars 05-08-2013 02:03 PM

Found what I'm looking for I think!

http://www.etrailer.com/Accessories-...933325S00.html

I'm going to order this and see if it fits.

Snipe 05-08-2013 02:32 PM

If you only use the trailer a couple of times a year a "band-aid" is the way to go. Good luck.


All times are GMT -4. The time now is 01:32 AM.