TeamTalk

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   General / Other (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=25)
-   -   Blower Hose (http://www.mastercraft.com/teamtalk/showthread.php?t=54035)

Snipe 05-02-2013 01:44 PM

Blower Hose
 
During my cleaning process I noticed that the blower hoses coming from below the windshield are disconnected at the drivers feet. I really don't know how to route the new ones. I'm thinking one should stop at the motor compartment for underway natural flow and the other one might go to the blower that seems to go to the gas tank area. Am I close?? :confused:

mikeg205 05-02-2013 01:47 PM

should go behind bulkhead panel to route air to bilge area.

Snipe 05-02-2013 01:50 PM

I agree, but do they both stop there, or does one actually connect to the blower. Or....does the blower just suck the air out of the bilge (motor box area) and push it out the back?

Table Rocker 05-02-2013 02:00 PM

The blower should be sucking air from low in the bilge and sending it out the back. The vent hoses should connect to the passages coming into the front of the bilge from under the observer seat (battery cables are also there) and behind the driver's kick panel (wire loom also there).

Snipe 05-02-2013 02:04 PM

Thanks guys....Got it now.

mikeg205 05-02-2013 02:06 PM

Quote:

Originally Posted by Snipe (Post 931472)
I agree, but do they both stop there, or does one actually connect to the blower. Or....does the blower just suck the air out of the bilge (motor box area) and push it out the back?

Yup that's it...


All times are GMT -4. The time now is 05:35 PM.