TeamTalk

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   General / Other (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=25)
-   -   Attitude Adjustment Plate for '08 X-2 (http://www.mastercraft.com/teamtalk/showthread.php?t=53669)

Grant777 04-16-2013 04:52 AM

Attitude Adjustment Plate for '08 X-2
 
Hi.

I hijacked a thread in the refurbishment section but thought I'd better get my own post running. I have a 2008 X-2 and want to get the attitude adjustment plate kit. Any suggestions on the best dealer/website to try?

Cheers.

ttu 09-08-2013 08:49 AM

since no one ever responded and I am looking to do the same can anyone chime in please.

AlbertaSurfer 09-08-2013 09:17 AM

Have a look at Lenco Trim Tabs. They make some nice kits for a great price.

http://www.lencomarine.com/

Look at the online dealers listed for prices.

197 TT 09-08-2013 12:53 PM

Check out this thread... I'm planning to do this next spring to my 08 X2, want to tie it into the vdig...

http://www.mastercraft.com/teamtalk/...ad.php?t=31823

Stefan 09-08-2013 04:04 PM

Basically just find the right kit and dealer/price that suits you and mount it...

why not also put in the surf tabs while you guys are at it, unless you skip the surf part...

I could measure the tab sizes and placement on my x-15 if you want.

Integration with the original Mastercraft controls could prove somewhat time-consuming to say the least, from my experiences with MC OEM-Retrofitting...

Stefan 09-08-2013 04:36 PM

Basically just find the right kit and dealer/price that suits you and mount it...

why not also put in the surf tabs while you guys are at it, unless you skip the surf part...

I could measure the tab sizes and placement on my x-15 if you want.

Integration with the original Mastercraft controls could prove somewhat time-consuming to say the least, from my experiences with MC OEM-Retrofitting...


All times are GMT -4. The time now is 07:39 AM.