TeamTalk

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   Engine / Drive Train (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=24)
-   -   prop replacement (http://www.mastercraft.com/teamtalk/showthread.php?t=52502)

softailcowboy 01-27-2013 09:41 PM

prop install problem
 
I have 2005 prostar 197 tournament team and I bent my prop. pulled it with a puller went easy and sent it to O.j. props and Eric sent me a new one. the problem is I'm not get any engagement trying to put the new prop on. It won't go on far enough to start the locknut. the splines on the shaft have no burrs and all look good. I called Eric and told him the situation and he sent me another prop. Same thing. these are the same props as were originally on it. the splines on the prop are not going on the splines of the shaft.....stumped....looking for ideas.....


tnx


All times are GMT -4. The time now is 07:56 AM.