TeamTalk (
-   General Discussion (
-   -   boat lift with v-drive (

uplander 01-27-2013 06:23 PM

boat lift with v-drive
will a v-drive fit on a normal boat lift . the place I am looking to rent has the square tank style lift with bunks.

Table Rocker 01-27-2013 06:34 PM

If the bunks aren't pretty high above the tanks, you might drag your prop and rudder off on the frame of the lift. It just depends on how the lift is set up.

uplander 01-27-2013 06:52 PM

that was my concern - I will try to post a pic of the lift

uplander 01-27-2013 07:04 PM

here is a pic of the lift

CC2MC 01-27-2013 07:38 PM

What Table Rocker said. This looks more like a pontoon boat lift. It looks like it has low bunks and they look to be pretty close together, making it hard to line up just right where your prop is between the bunks. I would not even risk it. Also, you do not know what the capacity of that lift is. How long will you be renting the place?

uplander 01-27-2013 09:16 PM

we rent for one week

jafo9 01-27-2013 09:47 PM

no way would i put my MC on that lift. that lift looks identical to what i have my pontoon on. my pontoon has standard outer logs with lifting strakes and a larger center log for performance. thats the way that lift is setup. there is no way an inboard will work on that.

uplander 01-27-2013 10:00 PM

thanks guys, I gues the only other option would be to drop the lift and leave it down for the week

ChandlerR 01-28-2013 08:08 AM

On most lifts the bunks are adjustable. Might be worth a try to adjust or modify it.

gts-20 01-28-2013 09:25 AM

1 Attachment(s)
We rented a house on Lake Austin a couple of summers ago. . It had a lift that we used for almost week. I don't think it was ideal, but with a lot of attention to where the intakes/speedo wheel, and underwater gear were, and how far forward the boat was, it worked for the short time we were there. I wouln't have used it for more that the 4 days we were there though.

All times are GMT -4. The time now is 10:30 PM.