TeamTalk

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   Audio/Stereo (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=53)
-   -   Pics of your transom wired remote (http://www.mastercraft.com/teamtalk/showthread.php?t=52204)

monsterwake 12-29-2012 11:37 AM

Pics of your transom wired remote
 
Can anybody post me some pics of your transom wired remote installed? I am about to install mine and hoping to see where everybody else mounted theirs...
Thanks fellas.

CantRepeat 12-29-2012 12:13 PM

You have an 06 X1?

bbymgr 12-29-2012 02:13 PM

1 Attachment(s)
Your info says you have an '06 X1, here is an '07 X1.

mikeg205 12-29-2012 02:46 PM

Quote:

Originally Posted by bbymgr (Post 898622)
Your info says you have an '06 X1, here is an '07 X1.

Looks like Too_Tall's X2 - but he has the Hydrofoil Edition. ;)

monsterwake 12-29-2012 03:30 PM

Yes. 06 X1. Thanks in advance.

monsterwake 12-29-2012 03:35 PM

There is a spot under the mold line on the port side in the back where the fiberglass is missing and it looks like plastic was molded in a square. I am just wonder should I put mine there or above the mold line where bbymgr has his installed.

Mine are the Clarion remotes so I will be drilling a 2" hole so I just want to do it right.

KahunaCraft 12-29-2012 04:56 PM

1 Attachment(s)
SB side is the most common I've seen. If you surf, I'd go with the opposite side of the most surfed side for your boat. Pic isn't my X30, but mounted the same. Also think about your boat cover.

Attachment 88165

monsterwake 12-29-2012 05:41 PM

Thanks KahunaCraft. I wasn't thinking of the cover. Looks like I might go below the molding.
Still now hole yet. :)

monsterwake 12-29-2012 09:49 PM

2 Attachment(s)
I installed it above the mold line where the cover wouldn't be against it.
Thanks everyone for your help making this decision.

CantRepeat 12-30-2012 07:10 AM

Here's an install I did a while ago.

http://www.mastercraft.com/teamtalk/...ad.php?t=30053


All times are GMT -4. The time now is 01:47 PM.