TeamTalk

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   Towers (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=61)
-   -   Custom X Star Bimini/Cargo Rack (http://www.mastercraft.com/teamtalk/showthread.php?t=51652)

CumberlandXstar 11-09-2012 11:25 AM

Custom X Star Bimini/Cargo Rack
 
I am starting to build a custom bimini/cargo rack for my 2004 X-Star. I bought the boat as a left over model back in Spring of 2005. Put a ton of fun hours on it with family and friends and now me and my wife a prepping for our first child in January. The boat did not come with a bimini top and I never felt like we needed one because we have a houseboat and are not in the boat all day long so we enjoy the sun. Now we will need some shade so along comes a bimini. The boat can get crowded with boards so I always wanted more racks so why not build a cargo rack style bimini. I also figured I might as well mimic the picklefork on the front of my boat.

Here is the reference marks that I used to measure the tower

http://sphotos-a.xx.fbcdn.net/hphoto...92357236_n.jpg

http://sphotos-a.xx.fbcdn.net/hphoto...13164536_n.jpg

Here is my super extensive rendering of what look I am going for. Lots will change but this is the overall direction I am looking to go.

http://sphotos-a.xx.fbcdn.net/hphoto...26080804_n.jpg

I have a tubing bender but when out and bought a tubing roller because I think that the over all look of rolled tubing looks really good. It turns out the one tool Harbor Freight makes that works well is the tubing roller that comes with 1" , 1.5" and 2" roller dies.

http://sphotos-b.xx.fbcdn.net/hphoto...93934017_n.jpg

I ordered up 1/16" and 1/8" wall 6061 1" DOM Aluminum to roll some test pieces. And it worked great in both thicknesses. The rolls were very smooth and did not deform the aluminum at all. I decided to go with the 1/8" thickness for strength especially with the extra weight from carrying the boards.

http://sphotos-b.xx.fbcdn.net/hphoto...21918338_n.jpg

Here is my rough layout of the tower and where the cargo rack will be.

http://sphotos-a.xx.fbcdn.net/hphoto...47956254_n.jpg

http://sphotos-a.xx.fbcdn.net/hphoto...56490048_n.jpg

http://sphotos-b.xx.fbcdn.net/hphoto...38356493_n.jpg

XStar08 11-09-2012 02:30 PM

Nice project. Try to get an idea of how the piping is made on the original biminis. There is more than one that connects the bimini with the tower. Guess you will need also somethig that keeps the bimini in place when on speed (force from below, wind).

willyt 11-09-2012 03:18 PM

you really should just make bill really, really happy and buy a 2013. Let me know if you want any help with this buddy, its been too long

MASTIQUE 11-09-2012 08:52 PM

1 Attachment(s)
This pic may help you??Attachment 86461

CumberlandXstar 11-13-2012 06:49 PM

I laid out the outer structure with steel electrical conduit and held the shape up to the boat to see how I liked it. Looks pretty good and I am happy enough with the shape to keep going with it. I will post up some pictures tomorrow to show the progress.

CumberlandXstar 11-14-2012 01:00 PM

I propped it up to get an idea of how its going to look.

http://sphotos-b.xx.fbcdn.net/hphoto...89496631_n.jpg

Here are the clevis that I am going to use on the rolled strut to support the front of the bimini.

http://sphotos-b.xx.fbcdn.net/hphoto...05319629_n.jpg

76S&S 11-14-2012 01:42 PM

Nice project!

CumberlandXstar 11-14-2012 04:15 PM

Here are a few more pictures. I wish it would cover a little more than it does, but I want to keep the picklefork looking proportional unlike the others that have been done.

http://sphotos-a.xx.fbcdn.net/hphoto...66121090_n.jpg

http://sphotos-b.xx.fbcdn.net/hphoto...48995236_n.jpg

http://sphotos-b.xx.fbcdn.net/hphoto...55828406_n.jpg

http://sphotos-b.xx.fbcdn.net/hphoto...04452268_n.jpg

http://sphotos-a.xx.fbcdn.net/hphoto...99342216_n.jpg

BrooksfamX2 11-14-2012 04:41 PM

Lookin good so far...........

bjames 11-15-2012 05:09 PM

Dang... that is going to look awsome.


All times are GMT -4. The time now is 06:06 PM.