TeamTalk

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   Appearance (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=22)
-   -   2006 Xstar Dash/Switches (http://www.mastercraft.com/teamtalk/showthread.php?t=51164)

mlawler34 10-01-2012 05:13 PM

2006 Xstar Dash/Switches
 
2 Attachment(s)
Hey everyone. Looking for ways to spruce up my 2004 X STAR a bit. I have purchased stainless steel cup holders, a porter cable random orbital to get the hull in pristine shape, etc. What i would really love to do it upgrade the switches and backing plates for the ballast, bilge, lights, etc. to look like the 2006 X Star's like the below pictures. My questions are: Can this be done fairly easily? And for how much? Can i just order the parts from Mastercraft? If so, anyone have the part numbers?

Thanks in advance for all your help!

JerryW 10-01-2012 05:21 PM

Check ebay, search on Mastercraft Switch, or Mastercraft Dash. There's a lot out there. Some look exactly like the pictures you've posted.

swatguy 10-01-2012 05:54 PM

Look for a company Great Lakes skipper on eBay or solo. They stock a ton of older parts. From what I was told when dealers and Mfgs rid their parts this place picks em up. Found lots of older parts and accessories from them

76S&S 10-01-2012 06:00 PM

^ What he said...Great Lakes skipper is where I would start.

moleson10 10-01-2012 07:17 PM

http://www.charlotteskiboats.com/mastercraft_parts.cfm

I've had good luck here. If it's not listed call them. They can usually get it from MC if it is still available. Your local MC dealer can also.

If you buy from MC it WILL be expensive but I doubt you'll find those anywhere else.

mlawler34 10-01-2012 11:52 PM

Thanks guys. Will start my search!

Nateb 11-29-2012 09:17 PM

Where did you buy the stainless cup holders? What did they cost you?

sand2snow22 11-30-2012 12:53 AM

I wouldn't do it. I agree they look nice, but they break. I've just replaced most of these switches in 2007 X-2. Ask Sodar how many he has changed in his boat.

Thrall 11-30-2012 12:30 PM

2nd that. If you have rocker switches, keep them, better in the long run. You can get replacement toggle switches that are steel, but not sure if you can get them with lighted tips.
I've replaced several on my 06 X2 already.

DeeeJay02 11-30-2012 01:10 PM

There was a guy In the classifieds parts secrion who was parting out a salvaged 06 XStar. Check him out and see if he still has the dash parts


All times are GMT -4. The time now is 02:35 PM.