TeamTalk

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   Engine / Drive Train (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=24)
-   -   Barefoot Prop 197 w/LQ9/LY6 (http://www.mastercraft.com/teamtalk/showthread.php?t=47011)

03 35th Anniversary 04-21-2012 12:28 PM

Barefoot Prop 197 w/LQ9/LY6
 
Just a quick question to find out what prop all the footers are running on their 197's.

03 35th Anniversary 04-22-2012 07:01 PM

Bump......

DooSPX 04-22-2012 09:50 PM

Call Eric @ OJ. tell him what you want from the prop... i.e. more speed, flatter table, etc.

ncsone 04-22-2012 09:55 PM

I talked to Bill at Acme a while back and he had recommended a prop that would have supposedly gained +4 mph on the top end for a MCX/Slot 197. Unfortunately, I can not find that email now, but I want to say it was a #541 or 542.

If a prop could gain that much top end on a 197, it would be pretty impressive. I ended up not going that route as I already had 2 OJ's, we don't 'foot that much any more and I thought the 4 glad OJ might give a softer skier pull.

03 35th Anniversary 04-24-2012 07:23 AM

The 541 and 542 are both for 1" shaft.

DooSPX 04-24-2012 09:41 AM

Quote:

Originally Posted by 03 35th Anniversary (Post 832806)
The 541 and 542 are both for 1" shaft.

Give Eric a call.... 800-359-9730

EJ OJPROP 04-24-2012 10:03 AM

What are you currently running?

03 35th Anniversary 04-24-2012 02:04 PM

I have 3 props, 14.5 x 21, 14 x 20 and a 13.7 x 17.5 or 19.5 (I can't remember off hand.) all 4 blade props.

EJ OJPROP 04-24-2012 03:31 PM

Which size do you prefer? Would be a 19.5 with the slot. What is max MPH/RPM's?

Sodar 04-24-2012 04:06 PM

The wuss won't take it past 40mph.

Apparently this thing bolted to the motor is all show and no go!

http://www.mastercraft.com/photopost...f_IM000354.JPG


All times are GMT -4. The time now is 03:09 PM.