TeamTalk

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   General / Other (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=25)
-   -   Put new SeaDek on X2 platform...... (http://www.mastercraft.com/teamtalk/showthread.php?t=46829)

BrooksfamX2 04-15-2012 12:06 PM

Put new SeaDek on X2 platform......
 
2 Attachment(s)
Removed old cracking OEM pad. Scaped and sanded adhesive off. Sanded entire platform. Masked off pad area. Srayed edges with PlastiKote bedliner. Its not very rough and looks great. Installed pad. We'll see how it holds up.

With the bedliners texture and thickness, I didnt need to worry about minor sanding marks as it covered them right up.

:cool:

TOO-TALL 04-15-2012 12:12 PM

Looks great!

Thrall 04-15-2012 12:13 PM

Looks good! You bedlinered the swim deck? Too beat up to polish out?

BrooksfamX2 04-15-2012 12:28 PM

Quote:

Originally Posted by Thrall (Post 830395)
Looks good! You bedlinered the swim deck? Too beat up to polish out?

There were a few deep scratches that could not be wet sanded or polished out. I dont think there is gelcoat on it. For sure in the pad area, it was just paint or it is super thin, like about 1/64". Sanded through it very easily. I wanted a new look to the platform and the bedliner did it.

tr6coug 04-15-2012 12:46 PM

Cool SeaDek pad. I'm gonna have to get me one of those :)

Cloaked 04-15-2012 12:46 PM

looks good. I wish I could find a nice fiberglass platform for a 93 Prostar.

BrooksfamX2 04-15-2012 03:38 PM

Quote:

Originally Posted by tr6coug (Post 830398)
Cool SeaDek pad. I'm gonna have to get me one of those :)

Ya, you should. Took about 4 hours from start to finish. Hardest part was getting the old silicone adhesive off.

Let me know if you want help or tips.

BrooksfamX2 04-15-2012 03:41 PM

Anyone know of some kind of transom saver for an X2? want to keep the board scratches to a minimum.

sand2snow22 04-15-2012 04:46 PM

Quote:

Originally Posted by BrooksfamX2 (Post 830412)
Anyone know of some kind of transom saver for an X2? want to keep the board scratches to a minimum.

Clear bra. For the deep scratches you dob gelcoat into the scratch, come back later wet sand and compound. Looks good as new.

I do like the bedliner idea. You most likely won't ever have to worry about scratches again :D

j.mccreight@hotmail.com 04-15-2012 04:50 PM

Quote:

Originally Posted by BrooksfamX2 (Post 830412)
Anyone know of some kind of transom saver for an X2? want to keep the board scratches to a minimum.

for a pad
http://www.bakesonline.com/detail.aspx?ID=775
for a clear shield
http://www.savvyboater.com/store/p/7...Protector.aspx
also gator grip
http://wakejunky.com/


All times are GMT -4. The time now is 06:45 AM.