TeamTalk
Page 1 of 2 1 2 >
Show 40 post(s) from this thread on one page

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   General Discussion (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=6)
-   -   New prop for 1994 PS190 (http://www.mastercraft.com/teamtalk/showthread.php?t=41564)

baseman422 06-09-2011 02:27 PM
New prop for 1994 PS190
 
1 Attachment(s)
Hey everybody, we have a 1994 PS190 and last night we "re-shapped" our prop putting her back on the trailer. This was a horrible experience and a valuable lesson at the same time.

what prop would be sugested to replace it. it was factory as ar as I know. Pulled great, topped out at 40mph. We ski, wakeboard, and tube. If anyine has one for sale or even know what I should buy that would be great!!

We also need a part for our trailer. We need an arm that has to winch and roller the boat noses up to. I have to find one of those too.

Any help or direction is greatly appreciated!!

baseman422 06-09-2011 02:29 PM
1 Attachment(s)
Here is nother pic of the front of the trailer.

DooSPX 06-09-2011 03:25 PM
Look in Overtons or something for a winch/stand/bow stop. That is not a MasterCraft trailer.
anyway, about the prop, if you were happy with the performance of the prop, just send it to Eric at OJ Props or talk to them about a new custom prop for you.

flipper 06-09-2011 03:28 PM
Do you have the powerslot or 1:1 tranny?

flipper 06-09-2011 03:28 PM
Quote:
Originally Posted by baseman422 (Post 760634)
Hey everybody, we have a 1994 PS190 and last night we "re-shapped" our prop putting her back on the trailer. This was a horrible experience and a valuable lesson at the same time.

what prop would be sugested to replace it. it was factory as ar as I know. Pulled great, topped out at 40mph. We ski, wakeboard, and tube. If anyine has one for sale or even know what I should buy that would be great!!

We also need a part for our trailer. We need an arm that has to winch and roller the boat noses up to. I have to find one of those too.

Any help or direction is greatly appreciated!!
For the trailer, take it to a fab shop. It's not hard to make one at all.

baseman422 06-09-2011 04:29 PM
Quote:
Originally Posted by flipper (Post 760654)
Do you have the powerslot or 1:1 tranny?
We have the velvet drive 1:1

EJ OJPROP 06-09-2011 04:32 PM
I would suggest the 13 X 13 LC 1" 4-blade. I may be able to repair the damaged one as well. Feel free to give me a call.

DooSPX 06-09-2011 04:35 PM
Quote:
Originally Posted by EJ OJPROP (Post 760682)
I would suggest the 13 X 13 LC 1" 4-blade. I may be able to repair the damaged one as well. Feel free to give me a call.
There you go Baseman, right from the man!

DooSPX 06-09-2011 06:17 PM
Also, FYI, OJ makes the factory props on all MC's

east tx skier 06-09-2011 08:29 PM
Similar hull.

www.tylerskiclub.com/proptest.pdf


All times are GMT -4. The time now is 09:57 AM.
Page 1 of 2 1 2 >
Show 40 post(s) from this thread on one page