TeamTalk

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   General Discussion (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=6)
-   -   Little Heat from Heater during idle (http://www.mastercraft.com/teamtalk/showthread.php?t=40472)

j4rowell 04-19-2011 02:57 PM

Little Heat from Heater during idle
 
I've seen this issue on an old thread but not sure where. During idle I have less heat coming from my system. Obviously this makes sense, but what are you guys doing to fix this? Heatercraft recommended this Y-Fitting...

http://www.heatercraft.com/ProductIn...productid=H424

Has anyone done this? If so where exactly does it go? Thanks in advance.

Justjoe 04-19-2011 03:32 PM

Added the fitting last year. HUGE difference. There are instructions that come with it...pretty easy stuff.

MattsCraft 04-19-2011 05:57 PM

What??? Where does this go and how does it make the heater warmer at idle??? I have the factory heater install, '09 X2.

Thanks,

Justjoe 04-19-2011 06:39 PM

It uses science to make life better.

I'm sure MIskier will jump in and explain it (and, hopefully, tell us how he, Obama, Bill Gates, and Paris Hilton designed it!).

MattsCraft 04-19-2011 08:17 PM

Pictures on where it goes??? Anyone, I mean it looks pretty simple if it really improves the heat output:D

willyt 04-19-2011 09:23 PM

Matt,
Just installed this on my boat. Haven't had a chance to get out yet, so don't know how it works yet. Might have been the simplest part of the whole install

macattack 04-19-2011 09:24 PM

Use the "search" function on this site for "Y-Fitting"; you will find a few threads that explain the Y-fitting function and location.

Here's one... http://www.mastercraft.com/teamtalk/...ghlight=y-pipe

dcyr 05-01-2011 04:52 PM

PS197 Heater install
 
I installed the heatercraft heater in our boat and sure enough, not too hot. I have read the threads here and ordered the y fitting. Can someone post a picture of the install. thx


All times are GMT -4. The time now is 04:48 AM.