TeamTalk

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   General / Other (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=25)
-   -   X2 heater pics pls! (http://www.mastercraft.com/teamtalk/showthread.php?t=40464)

06x2 04-18-2011 06:36 PM

X2 heater pics pls!
 
Does anyone have or pls take some pics of thier heater in an x boat mine didn't come with one from the factory so I got one but need to see how the factory put it in thanks

rgardjr1 04-18-2011 07:13 PM

I don't have pictures but the blower on mine was installed on the floor in the compartment opposite the drivers seat. There's a ton of wiring that is run to that area making access very tight.

06x2 04-18-2011 09:57 PM

Thanks for the reply
 
Any chance of taking some pics that's where I'm gonna mount it I think but need to see hose routing Also where are your vents and how many

willyt 04-18-2011 10:15 PM

Why are you concerned about the factory mounting location? I found a seemingly better location for my 3 venter on my 05 x2, just in front of the port v drive locker. I would recommend being creative with it if you can find a better location.

rgardjr1 04-18-2011 11:02 PM

I won't be back up to the lake for a couple of weeks. Here's a link to a 3 port heater that Thrall did:
http://mastercraft.com/teamtalk/show...ghlight=heater

06x2 04-18-2011 11:29 PM

It's not recommend to mount there because of poss exhaust fumes

Thrall 04-19-2011 09:45 AM

Quote:

Originally Posted by willyt (Post 746261)
Why are you concerned about the factory mounting location? I found a seemingly better location for my 3 venter on my 05 x2, just in front of the port v drive locker. I would recommend being creative with it if you can find a better location.

I definately think there's a better way to install than the factory setup as well. See above.

Thrall 04-19-2011 09:47 AM

Quote:

Originally Posted by rgardjr1 (Post 746269)
I won't be back up to the lake for a couple of weeks. Here's a link to a 3 port heater that Thrall did:
http://mastercraft.com/teamtalk/show...ghlight=heater

Hey thanks! I was going to dig up those pics again.
06X2, if you have any questions, shoot me a message.

06x2 04-25-2011 10:13 PM

I posted my heater install pics in my albums. works great let me know what you think

rgardjr1 04-25-2011 10:38 PM

Looks good. Is it a 4 vent heater? Looked like you still had one more spot to hook up a hose. Mine came with a 2 vent installed and adding at least one more vent would be nice. The back wall of the drivers kick panel is much cleaner in your boat than mine. I'll got tons of wires, terminal blocks, ECU, Perfect Pass modules mounted all over that thing. I was considering adding a second sub where yours is mounted in the drivers kick paned, but I didn't want to have to try and move all of that crap out of the way. I was fishing some wiring through that area last year when I added my eq and I could barely reach my heater, much less trying to connect hoses or wiring to it. I know it would make for a pretty miserable couple of hours to try and add a bigger heater cramming myself down into that compartment.


All times are GMT -4. The time now is 05:16 AM.