TeamTalk

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   General Discussion (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=6)
-   -   Moving Boat to High Altitude Lake (http://www.mastercraft.com/teamtalk/showthread.php?t=40140)

Bcurler 03-27-2011 04:51 PM

Moving Boat to High Altitude Lake
 
I am moving my 2008 X-2 Saltwater Series from Sea Level to Lake Tahoe which is about 6300 ft. What should I do to make sure that it will run smooth once it gets out here?

starrski 03-27-2011 05:12 PM

I have taken my '08 X-14 from sea level to Park City UT at 5000 feet with no operational issues. The ECM adjusts air-fuel mixture automatically. I make sure I run premium fuel as HP decreases at altitude.

We ski with a family that brings a CSX from Phoenix to Lake Powell for five years with no issues. This is a 600' to 4,000' elevation change.

You may need to check on invasive species inspection requirements as a lot of states implemented new laws the last two years. I have to be inspected everytime I go from WA to ID or to any National Recreation Area like Lake Powell.

Last fall I got a lot of new questions about how I maintain my permanent ballast tanks to make sure I have no milofoil weeds, mussels, etc. at both Lake Powell and the Idaho border crossing inspections. I know our boating friends also had questions on maintenance of their live wells, which were visually inspected.

seth25 03-27-2011 06:04 PM

You will need to change to different pitch propeller to account for the loss of engine power at high altitude.

This is the only change that I know of bringing a late model boat up to high altitude.

Thrall 03-27-2011 11:20 PM

What engine? MCX? I think the 08 MCX X2's came with a 15.5" pitch prop. It will be lacking some at altitude. Not as bad as the 17 pitch on my 06 X2 though. That thing lost alomst 1000rpms at 6500-7000'. I propped down to a 14.5x14.25 ACME and the difference was night and day. Good hole shot now, got all my rpms back and still get 41-42mph on flat water.
Other than that it will run fine at altitude.

Cmpdman 03-27-2011 11:49 PM

We boat at 5900'. x45. We use 14.5x14.25 and reach 5100 rpm. Think the EMC will adjust the fuel/air mixture for you. Just re-prop and you should be good.

EJ OJPROP 03-28-2011 06:22 AM

I would suggest at least a 14.25 X 14, maybe even the 14.75 X 13 depending on how much ballast you typically run.


All times are GMT -4. The time now is 10:49 PM.