TeamTalk

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   Upholstery (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=28)
-   -   Honey comb aluminum plate (http://www.mastercraft.com/teamtalk/showthread.php?t=38516)

etduc 11-23-2010 11:04 AM

Honey comb aluminum plate
 
From time to time someone asks, for a source of the alum. deck panel on early 90s Pro Stars (190 & 205) Here's a link source: http://www.mcmaster.com/#aluminum-ho...sheets/=9udz70

Course there are other options, marine plywood, fiberglass wrapped construction grade plywood (both heavier, than OEM panel).

Kummer 02-02-2011 11:25 PM

Lookin to replace my engine cover and this is just what I needed thanks!!

east tx skier 02-03-2011 10:53 AM

I love McMaster-Carr! Make sure you use nice big washers to spread the load on those bolts to the motorbox hinges.

Craig 02-03-2011 11:47 AM

That is great!

Sadly, I don't think even the 4'x2' sheet is big enough. IIRC the width needed was about 26.5". I know this because I bought a quarter sheet of ply when I was re-making mine and it was too narrow. Maybe my boat is strange?

You could do it with two or make some spacers or something.

Good find, still love that place.

etduc 02-03-2011 12:05 PM

Quote:

Originally Posted by Craig (Post 730439)
That is great!

Sadly, I don't think even the 4'x2' sheet is big enough. IIRC the width needed was about 26.5". I know this because I bought a quarter sheet of ply when I was re-making mine and it was too narrow. Maybe my boat is strange?

You could do it with two or make some spacers or something.

Good find, still love that place.

There's always fleebay:
http://cgi.ebay.com/Nordam-Aluminum-...item45f7e0a007


All times are GMT -4. The time now is 03:09 AM.