TeamTalk

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   Engine / Drive Train (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=24)
-   -   Walters v-drive information (http://www.mastercraft.com/teamtalk/showthread.php?t=37509)

formosa 08-20-2010 08:29 AM

Walters v-drive information
 
Hi all,

I contacted The Walter Machine Company http://www.waltergear.com/, the manufactuer of the Walter V-drive that is in my 1995 and several Mastercraft boats prior to the newer v-drives. Also known as Walters

I tried to attach the operations manual, including servicing. It's 2.0mb and the limit is 1.91mb. :( But for a quick read (and what prompted me to look for this in the first place):

From Walter manual:
Walter V-drive oil: SAE 30, heavy duty non detergent motor oil.
Oil capacity: RV-26D: 2 pints. Proper level between L-H after run and sit for a minute.
* note there is no oil filter per say, but there is a "strainer" and two magnetic plugs to be serviced when changing the oil.
From the Indmar manual: Walters v-drive: SAE 30 motor oil Pennzoil, 2 pints (0.95L)

PM me and I'll send the manual out to you, perhaps someone else can post here.

Formosa

formosa 08-20-2010 08:32 AM

From Walter Machine Company. Very nice folks.

Sure; please note proper email address for correspondence is: info@waltergear.com

Thank you!

Thank you very much!

Can I put this on the Teamtalk Mastercraft site for other Walter owners can reference?


All times are GMT -4. The time now is 07:40 AM.