TeamTalk

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   General Discussion (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=6)
-   -   '03 x30 Tower Rack Padding (http://www.mastercraft.com/teamtalk/showthread.php?t=36917)

cwoods915 07-21-2010 10:51 AM

'03 x30 Tower Rack Padding
 
Hey guys, this is my first thread so hopefully I'm doing this right. I just bought a 2001 Maristar 230 a couple of weeks ago. The tower on it is the '03 x30 tower I believe. The racks for the tower are the spring loaded ones designed for this tower so they don't have bungie cords like most I've seen. The racks are missing a couple of the rubbery foam pieces in the board slots and I have tried to find them all over the internet. Does anyone know where I can find these? Or do you think I would almost be better off to just buy some generic adhesive foam or rubber and cut to fit? Any and all responses are appreciated. Thanks.

timvan 07-22-2010 07:38 AM

http://www.mastercraft.com/teamtalk/...ad.php?t=35217

Like this type of padding?

cwoods915 07-22-2010 09:11 AM

Yes, like that padding. It is different on these particular x30 racks than on the zero flex but it's the same concept. If I am correct the zero flex has more of a thin rubber strip sort of in the rack arms that cushions but also keeps the boards from sliding, and these x30 racks have more of a foam cushion on top of the arms for padding because once you tighten the spring loaded arms the board shouldn't slide. I have never seen these x30 racks before. I think that McMaster website has something that will work though. I really appreciate the help man. Thanks.

timvan 07-22-2010 06:18 PM

No problem

DavidMCX30 04-25-2011 12:16 PM

What's the best adhesive?
 
Quote:

Originally Posted by cwoods915 (Post 695994)
Yes, like that padding. It is different on these particular x30 racks than on the zero flex but it's the same concept. If I am correct the zero flex has more of a thin rubber strip sort of in the rack arms that cushions but also keeps the boards from sliding, and these x30 racks have more of a foam cushion on top of the arms for padding because once you tighten the spring loaded arms the board shouldn't slide. I have never seen these x30 racks before. I think that McMaster website has something that will work though. I really appreciate the help man. Thanks.

What is the best adhesive to repair the rubber pieces? I have all the pieces but the old adhesive is failing. Thanks!


All times are GMT -4. The time now is 03:48 PM.