TeamTalk

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   Towers (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=61)
-   -   Need knob for tower mirror (http://www.mastercraft.com/teamtalk/showthread.php?t=35708)

bfinley 05-31-2010 11:45 AM

Need knob for tower mirror
 
I have a 2006 X2 and lost the know for my tower mirror. I don't want to spend a lot of money for a knob and I'm assuming that's the case if I get one from a dealer. Anyone have any better suggestions??

Brandon

TX.X-30 fan 05-31-2010 11:51 AM

Quote:

Originally Posted by bfinley (Post 683047)
I have a 2006 X2 and lost the know for my tower mirror. I don't want to spend a lot of money for a knob and I'm assuming that's the case if I get one from a dealer. Anyone have any better suggestions??

Brandon



Someone that upgaded here should have an old one, I had 4 but have no idea what happened to then. I'll check the garage.

scott023 05-31-2010 12:21 PM

Quote:

Originally Posted by TX.X-30 fan (Post 683050)
Someone that upgaded here should have an old one, I had 4 but have no idea what happened to then. I'll check the garage.

Stu, I could sure use a spare if you find those units in the garage... wife already dropped ours in the water this year (in the marina, so I was able to retrieve it).

Thrall 06-01-2010 10:08 AM

Keep an eye on the mirror pins too. Finally got the bushiings glued in so they wouldn't fall out and darn near lost one of the pins this weekend.
In a pinch a bolt from the hdwr store would work.

MickyB 04-14-2013 03:08 AM

Tower mirror bolts
 
After losing my mirror knob bolt on my first outing, I searched high and low to find them.

I am not sure of the correct size yet, but I am onto something here. Various manufacturers have these available.

https://www.jergensinc.com/site/acco...?item_cd=21243

JRW160 04-14-2013 10:21 AM

I ordered one last year from Midwest mastercraft. It was $37.95.

GoneBoatN 04-15-2013 11:45 AM

Quote:

Originally Posted by Thrall (Post 683212)
Keep an eye on the mirror pins too. Finally got the bushiings glued in so they wouldn't fall out and darn near lost one of the pins this weekend.
In a pinch a bolt from the hdwr store would work.

I lost one of those bushings. It was about $5.00 for the $0.15 part at the dealer. I knew they were loose but my wife remove the mirror while over water. Made it known that top of ramp is the place to be doing that stuff. Glued in with silicon before the next trip out.

Bob B 04-15-2013 12:42 PM

Lowes or Home Depot should have a similar thumb screw.

georgea0731 04-15-2013 10:10 PM

I have a couple of these if it helps
 
1 Attachment(s)
I bought them just in case, may be someone can use them. Let me know.

wtrjock 08-20-2013 12:48 AM

I lost my mirror thumb screw and bushing this weekend. Am I stuck with a dealer purchse, or has someone found a source for these?


All times are GMT -4. The time now is 11:39 AM.