TeamTalk

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   Restorations and Refurbishments (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=62)
-   -   1997 Complete Renovation of Prostar 190 with Steyr 236 Diesel Engine (http://www.mastercraft.com/teamtalk/showthread.php?t=33716)

kiteklan 12-30-2009 10:09 AM

1997 Complete Renovation of Prostar 190 with Steyr 236 Diesel Engine
 
Hello,I will post my renovation experince under this threat.
I am renovating a mastercraft prostar 190 1997 model.
Started with a mistreated hull and without an engine.
I had bought a steyr 236 HP diesel engine with 4200RPM and 2:1 ZF 45 transmission.
Engine weighs 380kg with the transmission.

We built the treyler on our own with Knott axels/parts and I and U profiles.

Please tell me some hints or your opinions.

http://www.mastercraft.com/teamtalk/...1&d=1262042213

http://www.mastercraft.com/teamtalk/...1&d=1262042277


http://www.mastercraft.com/teamtalk/...1&d=1262042400

AFTER SANDPAPER AND POLISH

http://www.mastercraft.com/teamtalk/...1&d=1262042494

kiteklan 12-30-2009 10:15 AM

Diesel Engine and some accessories
 
4200 RPM 236 Horse Power Steyr 236 Engine 380 kg with the transmission
I have one propeller right now with a diameter 36cm but I guess it will not be enough,my plan is to lunch the boat with this propeller and get the draft and waterline with the engine,I have no idea about its draft and waterline and the total weight that is why ordering a propeller will not be wise without a certain measurement.

I about the trailer ,rims are from one of my old car (1989 Probe GT),I will try to get it lower and adjust the axels to the center of weight when I will finish the boat.
It is not easy to this work in Turkey since original parts are not easy to find and expensive.
http://www.mastercraft.com/teamtalk/...1&d=1262042607
Platform after some work
http://www.mastercraft.com/teamtalk/...1&d=1262159200
Interior Condition Chaos :)
http://www.mastercraft.com/teamtalk/...1&d=1262159370

kiteklan 12-30-2009 10:16 AM

Insturment Panel
 
Instrument Panel,
http://www.mastercraft.com/teamtalk/...1&d=1262159480

Original panel was in very bad condition ,we had covered it Fiberglass and make new holes for guages.

I was thinking to use Volkswagen Marine 225 V6 but it was above my budget.Steyr 236 is a light weight and powerfull engine but its dimensions are bigger then orginal mastercraft engines.

Does anyone has an idea how much an orignal mastercraft engine weighs(total weight with transmission? and RPM ,Transmission ratio?

There are more pictures on the my website

DemolitionMan 12-30-2009 10:21 AM

Looking Good.:)

thatsmrmastercraft 12-30-2009 10:26 AM

I am really interested in how that diesel performs in the boat.

Definitely making progress. Keep up the good work!

kiteklan 12-30-2009 10:52 AM

Name Of The Boat
 
1 Attachment(s)
Today we name the boat:

kiteklan 12-30-2009 10:54 AM

thanks ,I am trying to finish it in 2 weeks.

rholmes 12-30-2009 01:07 PM

The motor should weigh 227-272 kilograms fully dressed. A transmission was likely originally a hurth 1:1 and would have weighed probably in the neighborhood of 68 kilos. Operating RPM range would have been about 600rpm to a max of 4600-5000rpm. These are just rough figures, nothing exact. maybe someone else can help out with exact numbers.

jasonba1 12-30-2009 03:52 PM

awesome project

JLeuck64 12-30-2009 04:10 PM

Just a guess... but I think you will be disappointed with the boats performance if you go to all the trouble of making that engine combination fit. It looks like it is only a four cylinder engine in the photo.

Quote:

Originally Posted by kiteklan (Post 650448)
4200 RPM 236 Horse Power Steyr 236 Engine 380 kg with the transmission
I have one propeller right now with a diameter 36cm but I guess it will not be enough,my plan is to lunch the boat with this propeller and get the draft and waterline with the engine,I have no idea about its draft and waterline and the total weight that is why ordering a propeller will not be wise without a certain measurement.

I about the trailer ,rims are from one of my old car (1989 Probe GT),I will try to get it lower and adjust the axels to the center of weight when I will finish the boat.
It is not easy to this work in Turkey since original parts are not easy to find and expensive.
http://www.mastercraft.com/teamtalk/...1&d=1262042607
Platform after some work
http://www.mastercraft.com/teamtalk/...1&d=1262159200
Interior Condition Chaos :)
http://www.mastercraft.com/teamtalk/...1&d=1262159370



All times are GMT -4. The time now is 05:00 PM.