TeamTalk

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   Engine / Drive Train (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=24)
-   -   What cam (http://www.mastercraft.com/teamtalk/showthread.php?t=83657)

Bernie123 01-23-2018 08:08 PM

What cam
 
I have a 1984 351W Iím going to put flow tech heads on it should I replace the cam. Should I look at getting a roller cam or would a regular camera work also does anybody know what the cam specs are for a 1984 351W?

lakedrum03 01-24-2018 08:53 AM

Quote:

Originally Posted by Bernie123 (Post 1393267)
I have a 1984 351W Iím going to put flow tech heads on it should I replace the cam. Should I look at getting a roller cam or would a regular camera work also does anybody know what the cam specs are for a 1984 351W?

If you are going to be there, then you might as well upgrade the cam too. If you call any of the major companies (crane, comp, edlebrock, etc.) and give them your engine information, they will give you some options for the best set up.

1redTA 01-24-2018 09:24 PM

I believe Cam Motion has what you are looking for

blackhawk 01-26-2018 09:42 PM

Yea, I would replace the cam.


All times are GMT -4. The time now is 08:42 AM.


2018