TeamTalk

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   Audio/Stereo (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=53)
-   -   Syn 6 to power 2x Pro80s 1x pro485? (http://www.mastercraft.com/teamtalk/showthread.php?t=51000)

agarabaghi 09-22-2012 11:47 AM

Syn 6 to power 2x Pro80s 1x pro485?
 
So I have a syn6 powering 4 cabin speakers and 1 pro485 on the 5/6 channel bridged.

It seems way easier to find a 4 channel amp that does 75 - 100watts at 4ohms for my interior speakers, than to find one that will do 200x2 @ 4ohms.

Could i bridge channels 1/2 and 3/4 to power the pro80 cans, while leaving channel 5/6 bridged for the pro485?

MLA 09-26-2012 01:33 PM

To answer your question, yes. The Syn-6 is ideal for the 80/485 3-Some. The new Wet Sounds HT-4 will deliver 110W rms x 4 @ 4 ohm or 300W rms x 2 when bridged into two chnl mode @ 4 ohm. This will serve 4 in-boats well, as well as wake those Pro-80's up if you when that route. A couple other options that would work for both options also: Syn-4, Kicker IX500/4, ARC 300.4 or XDi803. The Syn-2 is perfect power a set of Pro-80 and would really push those 4 in-boats as well.

willyt 10-01-2012 12:22 PM

When are the ht amps coming out? I have 2 pair of relatively underpowered rev 8.... (175 watts a piece)

willyt 10-01-2012 12:35 PM

Whoops, saw that they're already out. Aren't they coming out with another line of amps that are supposed to be super-powerful?

JRW160 10-01-2012 12:49 PM

They have some sinister series amps coming out. I saw the specs on them somewhere. I think they were all class d and all over $1k.

JRW160 10-01-2012 12:50 PM

Here are the specs from a wakeworld post:

SD6:
Stereo @ 4 ohms 6 x 185 Watts
Stereo @ 2 ohms 6 x 290 Watts
Bridged @ 4 ohms 3 x 585 Watts

SD4:
Stereo @ 4 ohms 4 x 185 Watts
Stereo @ 2 ohms 4 x 340 Watts
Bridged @ 4 ohms 2 x 685 Watts

SD2:
Stereo @ 4 ohms 2 x 400 Watts
Stereo @ 2 ohms 2 x 620 Watts
Bridged @ 4 ohms 1 x 1250 Watts

MLA 10-01-2012 02:45 PM

Quote:

Originally Posted by willyt (Post 881422)
When are the ht amps coming out? I have 2 pair of relatively underpowered rev 8.... (175 watts a piece)

Yep, HT series are shipping and the new SD's are getting close to release. A single SD-2 would light up those 4 Rev-8 at roughly 300W to each or go with a pair of HT-4's for about the same RMS, just 2 amps as opposed to one.

Both the HT and SD are Class-D on the Full-Range.


All times are GMT -4. The time now is 03:33 PM.


2018