TeamTalk

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   General / Other (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=25)
-   -   Wake plate actuator dead, need PN to replace. (http://www.mastercraft.com/teamtalk/showthread.php?t=47804)

BrooksfamX2 05-22-2012 12:21 AM

Wake plate actuator dead, need PN to replace.
 
2007 X2, Lenco tab actuator. Just took it off and opened it up. The motor is all corroded. Hooked power directly to it, no go. Worked last fall. The label is missing. Does anyone know the PN so I can order a new one??

Will call the dealer tomorrow also.

TIA

BrooksfamX2 05-22-2012 11:34 AM

:confused:..................

CantRepeat 05-22-2012 11:56 AM

I called Lenco and told them which boat I had and the nice lady gave me the part number and a phone number to a couple of retailers of which one gave me a better price then I could find online.

BrooksfamX2 05-22-2012 01:26 PM

Quote:

Originally Posted by CantRepeat (Post 841997)
I called Lenco and told them which boat I had and the nice lady gave me the part number and a phone number to a couple of retailers of which one gave me a better price then I could find online.

Good idea..........:)

davidstan 05-22-2012 01:50 PM

mine is starting to act up a little so probably not long for me to replace also. let us know about the cost and install please.

BrooksfamX2 05-22-2012 01:59 PM

Quote:

Originally Posted by davidstan (Post 842028)
mine is starting to act up a little so probably not long for me to replace also. let us know about the cost and install please.

Called Lenco. They will get back to me. I'll post the PN and best price/seller when I get it.

I did see prices from $180-$200 for what I think it is but want to verify.

I will install myself.

BrooksfamX2 05-23-2012 12:32 PM

OK, contacted my dealer and for my 07 X2 the MC PN is 559033. Contacted Lenco and the Lenco model is 101XDS and the PN is 15057-001.

I have found them for about $200 on the internet. The dealer price is $348. ouch!

You can guess where I'll get it.

osmonet 02-17-2016 10:11 PM

Sorry to resurrect a old thread, but......

Has anyone tried to repair via motor replacement?

http://www.ebay.com/itm/Replacement-...FVJCgh&vxp=mtr

Locked 02-18-2016 09:39 PM

Should work fine if you replace all the seals, normally the part that extends and retracts that leaks. Easy to replace motor.


All times are GMT -4. The time now is 03:19 PM.


2018