TeamTalk

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   General Discussion (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=6)
-   -   ProStar 190 Trailer Lights (http://www.mastercraft.com/teamtalk/showthread.php?t=84389)

gjxjet 04-06-2018 09:55 PM

ProStar 190 Trailer Lights
 
Anyone know where to find side marker light exact replacements? My main objective is to not drill new holes in the fiberglass fender body. Looking for a sealed unit with two stud holes, one on each side centered vertically. The wire hole is centered horizontally, slightly higher than center. Two are red and two are amber...Iíve looked everywhere I can think...

Fullpass 04-06-2018 10:06 PM

Can you post a picture of the side marker light your looking for ~ that would help

gjxjet 04-07-2018 08:00 AM

Will do. Iím out of town, but will get a pic when I get home.

thatsmrmastercraft 04-07-2018 10:01 AM

3 Attachment(s)
They look like this. I sell these, and have more options, but these should be what you are looking for.
Dimensions are : Length: 2 1/2" Width: 1 1/4"

millpondkid 04-07-2018 09:16 PM

If your talking about the lights I'm thinking of you can find them at farm and fleet, Walmart or truck stops near interstate.

millpondkid 04-07-2018 09:18 PM

Yep just saw pics. Those 3 places will have them.

thatsmrmastercraft 04-08-2018 08:40 PM

ProStar 190 Trailer Lights
 
I offer a complete LED light replacement package for $99. It comes with two brake lights, two red and two amber side marker lights, triple light bar, bases, grommets and wiring pigtails. Lights have a lifetime warranty and this package comes with Free Shipping.


Sent from my iPhone using Tapatalk

millpondkid 04-09-2018 01:02 PM

That's a great deal!!

leadsthebest 04-10-2018 11:39 AM

Peter,
Does that kit fit the 1992 190 trailer?

gjxjet 04-10-2018 12:14 PM

3 Attachment(s)
https://www.mastercraft.com/teamtalk...1&d=1523372334

Okay, finally got some pics.

The light is a sealed unit. The holes in the light fixture are strictly for mounting, not for lense removal. The light itself is 3 inches wide and 2 1/4 inches tall. Iíd like to replace with the same so as to fit into the molded recess of the fiberglass fenders. They are mounted with machine screws and locknuts. There are two wires, power and ground. Iíve seen many that rely on a single center stud for mounting and the ground. While I could make that work, itís not ideal.

The stud holes are 2 1/4 inches apart. This will preclude drilling more holes in the fender.

This is a factory mc trailer. 92.


All times are GMT -4. The time now is 01:04 AM.


2018