TeamTalk

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   General Discussion (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=6)
-   -   96 PS 190 PCM ZR6 Conversion (http://www.mastercraft.com/teamtalk/showthread.php?t=57937)

CruisinGA 12-09-2013 04:36 PM

Quote:

Originally Posted by Bouyhead (Post 993788)
I read all the prop threads and hear lots of good things about Acme, especially on top end speed. But then again, I haven't heard a bad word about Eric at OJ. Should be fun figuring out a prop once I get these alignment issues figured out and get a couple of hours on the new motor.

Eric was great to work with when I had my original 13x13 repaired. At the time, he recommended that as the best OJ had for all-round performance on my boat so I tried the Acme three blade for comparison and it was better. That was a couple years ago so things may have changed.

JohnE 12-09-2013 05:04 PM

Quote:

Originally Posted by CruisinGA (Post 996576)
Eric was great to work with when I had my original 13x13 repaired. At the time, he recommended that as the best OJ had for all-round performance on my boat so I tried the Acme three blade for comparison and it was better. That was a couple years ago so things may have changed.

I don't think anything has changed in the prop world since then.


All times are GMT -4. The time now is 02:14 AM.