TeamTalk

TeamTalk (http://www.mastercraft.com/teamtalk/index.php)
-   General Discussion (http://www.mastercraft.com/teamtalk/forumdisplay.php?f=6)
-   -   Anti-slip tread on 94 trailer (http://www.mastercraft.com/teamtalk/showthread.php?t=68781)

h2oskifreak 07-24-2015 11:33 AM

Anti-slip tread on 94 trailer
 
I have a 1994 PS 190 and the anti slip matt on the trailer is in need of repair, or replacement. It has the MC logo and stars on each side of the fiberglass fender and another 2 each side that are not MC specific. Should I clean up and re glue them in place, or can I get these somewhere to save me time and give me a cleaner look? Thanks

mikeg205 07-24-2015 11:39 AM

unfortunately you have to cut your own..

AntiSkid pads soft
http://www.antisliptapeshop.com/Prod...e-Cuts-8x25/81

I think I will be going black diamond and cut out the MC - since winters are now so freakin long...lol

McFire 07-26-2015 05:53 PM

I used R and P Carriages in Senica IL. I got a roll of 18" x 10ft for $25.00. It was a few years ago, so pricing may have changed. I made a template from the old pieces and cut out the MC and star. Not a perfect job, but pretty good.

BrianM 07-27-2015 09:33 AM

1 Attachment(s)
I was just going to update another thread with photos of my step pads. I just ordered a 'long sheet' from SeaDeck which was enough to do all 6 pads plus replace the carpet on the inside of the wheel wells. Total cost was about $75.

I cut all the pads myself with a razor knife and straight edge.

Photo is right after the boat came out of the water so there are still wet places.


All times are GMT -4. The time now is 01:56 PM.


2018