TeamTalk (
-   Electrical (
-   -   03 X30 fuel sending unit (

SkiMC 08-26-2013 09:53 AM

03 X30 fuel sending unit
Has anyone had any issues with their gas gauge on a 03 X30 not working properly? I have been working with the local MC dealership trying to get my gas gauge fixed for the last 3 months. They have tried everything, replaced it twice, added a new part per the manufacturer of the stock sending unit and still nothing. It shows full all the time... Any suggestions would be greatly appreciated.


CC2MC 08-26-2013 03:31 PM

There is a thread on here about testing a sending unit. All you really need is a volt meter and it will be able to read the signal of the sending unit. More than likely it is not the gauge itself. Check out the thread below.

SkiMC 08-26-2013 03:36 PM

03 X30 fuel sending unit
I will check it out. Thanks.

nickespi 08-26-2013 03:42 PM

Does yours read full all the time until it's empty?

SkiMC 08-27-2013 09:38 AM

Yes it reads full all the time. Don't know if it goes to empty when bone dry because have not let it get there yet.

mobilecascade 08-28-2013 02:26 PM

Thanks for asking as ours (02 XStar) just started doing the same thing these last few weeks, after dealer looked at it

g-Dog 08-28-2013 02:42 PM

If it's the same type of sending unit that's in my '02 205v there should be adjustment screws on the top.

CC2MC 10-16-2013 02:15 PM

SkiMC, You get this issue resolved?

All times are GMT -4. The time now is 01:20 AM.