Go Back   TeamTalk > View Profile

MC25 MC25 is online now

MC Master Poster

Visitor Messages

Showing Visitor Messages 1 to 10 of 25
  1. ThirdCoastX30
    05-22-2018 10:29 AM
    ThirdCoastX30
    Hi Aric- What size bags do you run in your X30? I have the stock ones in my 16 x30 and just heard I can go larger-- not sure what I need though
  2. Black ‘n Green
    05-19-2018 02:06 PM
    Black ‘n Green
    Aric, although some people on this site seem to enjoy throwing you some shade, you appear to be as connected as anyone here. I am hoping you know or have a way to get an answer to my questions: I own a 2017 xt21 demo boat with the plug n play bags. The bags that came with the boat are labeled fo the xt23. There is no designation as to how many pounds they hold. I know the rear ballast on my boat is listed as 900# each side. What I am trying to find out is “does the size of the bags differ between the xt23 and the xt21?” and “what size bag do I have?”. My bags don’t completely fill the compartment before water exits the overflow port, about 5” of air space between the filled bag and top of the locker. I have measured the rear compartments and they are 35L x 25W x 25H, which is the same size of the WakeMakers 890# bag. Looking to increase ballast load in the boat, but it would be nice to know how much I will have in the rear if I put the 890#’s in. I already have 400# of lead that I will use to find the perfect balance front to rear. This obviously is my plan to impact my surf wave. I understand wakeboard wake will be different. Hopefully you can answer my questions or direct me to someone that can.
  3. potsie
    04-23-2018 08:52 AM
    potsie
    if u would like the amp i will need your address i will send it the cheapest way
  4. DoubleGun
    01-19-2018 10:27 PM
    DoubleGun
    Hi Aric,

    I am looking to buy my first boat. I have a wife and two girls (9&12 yrs old). I am looking to try surfing. I just posted a WTB thread in the forum for a 2013-2015 x-30. I live in Granbury, TX. Do you happen to like your x-30? Also, do you know of any for sale?

    Thanks,
    Rhett
  5. Wendell
    10-13-2017 04:47 AM
    Wendell
    MC25,

    I have seen you comment a few times about how much you like the X26 surf wave. My wife and I are considering upgrading from a 2016 X23 to a 2018 X26 and was curious if you thought the X26 surfs as good as the X23.

    We love our X23 but wanted to upgrade to a bigger boat. I demoed a couple different X26 at TXMC and did not think the wave was as good as the X23. I noticed that the surf settings used during the demo did not fill up all the ballasts 100% and was curious if you used different settings. I would have thought since the X26 is bigger (more surface area), it would need more weight to offset the surface area.

    I can't seem to find much talk about the X26 on TT and would appreciate any feedback.

    Thanks.
  6. LittleFuss
    10-03-2017 08:22 AM
    LittleFuss
    Get Some Recently Dated Photos Before You Make The Trip To La. I Know Of 2 People That Have Gone To Look Or Tried To Go And Look At That Boat. 1 Walked Away When He Saw It The Other Could Not Get The Guy To Give Him A Time To Look At It. The One That Saw It Stated That Those Photos Posted Are From The Day It Was Purchased And The First Time It Was Put In The Boat House.
  7. Fbeltrao
    09-17-2017 07:59 PM
    Fbeltrao
    Hey MC25 interested on hearing your thoughts on the wakeboard wake of the new Xstar? Is it the real G killer? Much appreciated
  8. SpokaneMadMan
    08-15-2017 02:10 PM
    SpokaneMadMan
    Any chance you could text some pics of the Ronix board you have for sale? (509) 960-0059
  9. SpartanNate
    07-25-2017 01:41 AM
    SpartanNate
    Hey Aric! I bought my first MC back in 2015 - I researched **** real hard for a while...really wanted an MC after I skied behind a couple when I was a kid. When I found TeamTalk it was the perfect place to get the lowdown on MC boats.

    When I first started trolling TeamTalk I remember a thread where a Mod was asking people if they should ban you. I didn't know the history, so I was curious - I didn't go looking or find anything, but it stuck with me that you were a renegade. I have to say, you show up in at least 75% of the posts I read and your contributions are awesome. A lot of guys here seem to have a "high and mighty" attitudes, but I've found you just plain speak your opinion and don't claim you're an expert...however you have as much or more experience in this arena than others. Probably not a 1980's restoration expert, but definitely a voice of what's going on today. I've also noticed some of those curmudgeonly types seem to have left. Anyway, thanks for your contributions - I always appreciate how you share what you feel even in the midst of the other long timers.

    Maybe we can connect sometime if I get down South. My company has a big presence in Houston and the Gulf Coast area - I know it's a hefty drive from where you're at, but if I ever get down that way, I'll see how close I am...I know you always give a good plug for Texas MasterCraft, so I assume you're closer to Ft. Worth.
  10. TXMC-06X2
    04-19-2017 12:07 PM
    TXMC-06X2
    MC25, I recently picked up a 13 X25. It does not have gen2. I was wondering if you could help me with the setup of the surf wave. im coming from a 06 X2 with no tabs at all. The X25 has a center tab. What would you recommend?

About Me

  • About MC25
    City
    Flower Mound
    State
    Texas
    Location
    Grapevine, Texas
    Gender
    male
    Team MasterCraft Member
    no
    Boat Owned
    2016 X30, 85 S&S
    Occupation
    Fun having
  • Signature
    -Aric

    LONE STAR MASTERBASH 2018

    Details released eventually

    2016 X30-Wetsounds galore
    2017 Misty Harbor Tri-Toon
    1985 S&S- For Sale

Statistics

Total Posts
Visitor Messages
General Information

Friends

Showing Friends 1 to 10 of 12

All times are GMT -4. The time now is 02:24 AM.


2018