TeamTalk http://www.mastercraft.com/teamtalk The online discussion board for Team MasterCraft and MasterCraft Boat Company. - TTAdmin, Phil Walker en Thu, 17 May 2012 02:48:53 GMT vBulletin 60 http://www.mastercraft.com/teamtalk/mc2009/images/misc/rss.jpg TeamTalk http://www.mastercraft.com/teamtalk Replacing Sub Help http://www.mastercraft.com/teamtalk/showthread.php?t=47632&goto=newpost Thu, 17 May 2012 01:45:24 GMT Well my old clarion sub has a long crack in the cone and definitely needs to be replaced. Looking to get a new JL 10 infinite baffle. My question is whether I should leave the current surround (for lack of a better word) or take it out. And if I leave it should I dynomat it? Suggestion and thoughts... Well my old clarion sub has a long crack in the cone and definitely needs to be replaced. Looking to get a new JL 10 infinite baffle. My question is whether I should leave the current surround (for lack of a better word) or take it out. And if I leave it should I dynomat it? Suggestion and thoughts are greatly appreciated. Thanks in advance. Attachment 78923Attachment 78924
Attached Images
  
]]> Audio/Stereo mlawler34 http://www.mastercraft.com/teamtalk/showthread.php?t=47632 <![CDATA[Boom?! - We don't need no stinkin' boom!]]> http://www.mastercraft.com/teamtalk/showthread.php?t=47631&goto=newpost Thu, 17 May 2012 01:42:08 GMT Guess I will alter WTB Boom post from earlier in the week. :D Got both 8yr old up tonight on 3rd pull and 6yr old is itching to try. Will post some pics this weekend. Guess I will alter WTB Boom post from earlier in the week. :D

Got both 8yr old up tonight on 3rd pull and 6yr old is itching to try. Will post some pics this weekend. ]]> General / Other RustyMC http://www.mastercraft.com/teamtalk/showthread.php?t=47631 good ski handles? http://www.mastercraft.com/teamtalk/showthread.php?t=47630&goto=newpost Wed, 16 May 2012 23:29:58 GMT I have a 13 inch raduis tractor grip from Straightline I am using now. It is a warranty handle from a broken handle I bought from them. I broke the other one at the end where the handle meets the rope and took a real nasty digger because of it (metal actually broke). Well, I survived that to ski... I have a 13 inch raduis tractor grip from Straightline I am using now. It is a warranty handle from a broken handle I bought from them. I broke the other one at the end where the handle meets the rope and took a real nasty digger because of it (metal actually broke). Well, I survived that to ski another day and they replaced it. Within a few uses the vinyl sheath covering the rope from each side to the main line started cracking. I used black elec tape and shiek the balance of the season with it that way. Now early next season, the other side cracked and completely in two pieces now. I am sure the plastic is breaking from my 250 lb. ski partner handle dinging his ski when he fails to get up. Does anybody see a problem taking them off entirely, letting my "big boy" partner ski it into the ground and me getting a better handle. Is it safe w/ floppy rope side lenghts for him? What brand should I persue? I ski 22-35 off and like a tractor grip. I remember a place where a lady made custom handles, but searched "handles" and too many threads came up to look through them all. Suggestions/input please. ]]> General Discussion h2oskifreak http://www.mastercraft.com/teamtalk/showthread.php?t=47630 wanted: Replacment seats for 04 x30! http://www.mastercraft.com/teamtalk/showthread.php?t=47629&goto=newpost Wed, 16 May 2012 22:08:08 GMT I need two replacement seats for an 04 x30. I need the seat cover that goes over the ice chest and the rear left little corner piece. I know its a long shot but I though I might see if anyone has these thanks! I need two replacement seats for an 04 x30. I need the seat cover that goes over the ice chest and the rear left little corner piece. I know its a long shot but I though I might see if anyone has these thanks! ]]> x30murray http://www.mastercraft.com/teamtalk/showthread.php?t=47629 Need where to find oem 04 x30 seat cushions ASAP! http://www.mastercraft.com/teamtalk/showthread.php?t=47628&goto=newpost Wed, 16 May 2012 21:27:16 GMT Anyone know where to find oem style seat cushions for an 04 x30? I let someone borrow my boat and the ice chest cover and corner seat cover blew out! Mastercraft dealer isint returning my calls. Please help! Anyone know where to find oem style seat cushions for an 04 x30? I let someone borrow my boat and the ice chest cover and corner seat cover blew out! Mastercraft dealer isint returning my calls. Please help! ]]> Upholstery x30murray http://www.mastercraft.com/teamtalk/showthread.php?t=47628 Air Temp Reading on 2012 http://www.mastercraft.com/teamtalk/showthread.php?t=47627&goto=newpost Wed, 16 May 2012 20:40:14 GMT Another question for 2012 owners. My air temp readout does not work on my boat. They dealer says "none of the '12's" are working right now. There is a bug that MC has to figure out. Is this true? Is anyone else having the same issue? Or is your air temp off too? ]]> General / Other AZx30OD http://www.mastercraft.com/teamtalk/showthread.php?t=47627 GPS, chart plotter on newer boats http://www.mastercraft.com/teamtalk/showthread.php?t=47626&goto=newpost Wed, 16 May 2012 20:31:07 GMT Is anyone using the chart plotting navigation screen on their newer boats? In order to activate this feature on mine I understand that I need to get a GPS sensor from MC? Is this the same as upgrading to zero off? Any ideas on this? Cost? Is anyone using the chart plotting navigation screen on their newer boats? In order to activate this feature on mine I understand that I need to get a GPS sensor from MC? Is this the same as upgrading to zero off? Any ideas on this? Cost? ]]> General / Other AZx30OD http://www.mastercraft.com/teamtalk/showthread.php?t=47626 2012 BIG, Recalling Rider Settings not working http://www.mastercraft.com/teamtalk/showthread.php?t=47625&goto=newpost Wed, 16 May 2012 19:32:27 GMT For some reason I cannot "Activate" any rider settings for the life of me. Here is what Im doing, let me know if im missing a step.

1. In the Quick List, I set speed to 20mph, Center trim set to 30%, All 3 ballast 100% full
2. Save the current rider and tap on "Activate"
3. Screen then jumps to the Cruise screen... nothing happening yet.. no trim or ballast being adjusted.
4. Tap on Cruise ON buttom.... Set speed of 20mph shows up in green and confirms that cruise is set and the rider name is displayed at top left corner of screen... still no change in trim or ballast. Everything is reading 0%

Now what do I do. How do I get the ballast and trim to automatically set to the saved rider setting?

BTW... this is the 2012 touch screen, Not sure of the Software Version, and I do have P&P ballast. ]]> General / Other bjames http://www.mastercraft.com/teamtalk/showthread.php?t=47625 X-30 trailer bunk set up http://www.mastercraft.com/teamtalk/showthread.php?t=47624&goto=newpost Wed, 16 May 2012 19:00:29 GMT We have a 2003 X-30 which we keep on a lift. We have no trailer and live quite literately in a swamp (that is no one I know has an X-30 trailer).

The boat has been on the lift for years but I'd like to now try to replicate the trailer bunk setup - or some of it. I do not like the two stringer bunks i have now to support the boat with ballast. Hoping to not have to empty the ballast all the time (sometimes we just go out for 30-45 minutes). This is a 30k lbs lift so no issues on that.

So would it be possible to get a photo or two of a 2003- to ?? trailer and the spread, ~angle, rise and run dimensions of the bunks?

and of course if anyone thinks this a crummy idea - I'd like to hear that as well.
Thanks -- ]]> Trailers dilbert_skiing http://www.mastercraft.com/teamtalk/showthread.php?t=47624 Danbury CT area waterskiing http://www.mastercraft.com/teamtalk/showthread.php?t=47623&goto=newpost Wed, 16 May 2012 18:16:03 GMT Hello - anyone in the Danbury/Fairfield County area interested in waterskiing shoot me a PM, we ski at Lake Lilinonah which is 5 mins from Candlewood. Hello - anyone in the Danbury/Fairfield County area interested in waterskiing shoot me a PM, we ski at Lake Lilinonah which is 5 mins from Candlewood. ]]> Find A Pull / Give a Pull sam196370 http://www.mastercraft.com/teamtalk/showthread.php?t=47623 <![CDATA[2007 X2 Won't start and electrical gremlins]]> http://www.mastercraft.com/teamtalk/showthread.php?t=47622&goto=newpost Wed, 16 May 2012 17:49:19 GMT Hi everyone ... working with my friend today on his new to him X2 2007. Yesterday evening the boat would run fine but the Starboard Ballast pump stopped working. Flashed the error code that the AI module had lost contact with the pump. Today the engine turns over and does not fire .. .almost like... Hi everyone ... working with my friend today on his new to him X2 2007.

Yesterday evening the boat would run fine but the Starboard Ballast pump stopped working. Flashed the error code that the AI module had lost contact with the pump.

Today the engine turns over and does not fire .. .almost like there was no fuel pressure or the kill switch was disconnected .... we have not tested fuel pressure yet .... funny thing is the ECU warning is flashing on his dash gauge and we have lost the fuel gauge. it does not read anything ....

He has also noticed his stereo and amp have not been right for the past 2 weeks but was not sure it was related.

Tested with another battery ... same result. Cleaned the ground at the engine by the ECM area ..... we are going to clean the battery terminals and check that out ....

proceeding to test the electrical connections here in a little while ...

My question is ... any other thoughts, places to check .... almost feels like the ECU is not working but my brain is telling me voltage drop or electrical problem.

Any one want to chime in ? Thanks in advance. ]]> Engine / Drive Train 93Prostar190 http://www.mastercraft.com/teamtalk/showthread.php?t=47622 New GPS conversion for stqndard Perfect Pass models http://www.mastercraft.com/teamtalk/showthread.php?t=47621&goto=newpost Wed, 16 May 2012 16:58:04 GMT Can u please delete. Somehow got double posted. Lorry Can u please delete. Somehow got double posted. Lorry ]]> General Discussion swatguy http://www.mastercraft.com/teamtalk/showthread.php?t=47621 Velvet drive parts question http://www.mastercraft.com/teamtalk/showthread.php?t=47620&goto=newpost Wed, 16 May 2012 16:54:52 GMT So Im working on a 1990 prostar, it has a velvet drive with 1.52 reduction unit. As the story goes, the transmission was underwater when the previous owner bought the boat, and thus decided to pull it and rebuild it. Seem like all the parts are there, but some of the gears have rust on them. The... So Im working on a 1990 prostar, it has a velvet drive with 1.52 reduction unit. As the story goes, the transmission was underwater when the previous owner bought the boat, and thus decided to pull it and rebuild it. Seem like all the parts are there, but some of the gears have rust on them. The drive gear assembly for example has rust.



Is there a way to figure out what corrosion is "fatal" and what I dont need to worry about too much. Im thinking that a lot of the corrosion may be in areas that arent vital.

Any help is greatly appreciated, as Id like to begin assembly on this unit as soon as possible.

Thanks,
Nikolai ]]> Engine / Drive Train nkorep2 http://www.mastercraft.com/teamtalk/showthread.php?t=47620 ufp A-60 brake actuator, breakaway cable http://www.mastercraft.com/teamtalk/showthread.php?t=47618&goto=newpost Wed, 16 May 2012 16:40:55 GMT I have an ufp A-60 hydraulic brake actuator on my trailer. I need to replace the breakaway cable. Do I have to remove the slide to replace the cable? I can’t see any other way. Thanks for any help. Bob B I have an ufp A-60 hydraulic brake actuator on my trailer. I need to replace the breakaway cable.
Do I have to remove the slide to replace the cable? I can’t see any other way.
Thanks for any help.
Bob B ]]> Trailers Bob B http://www.mastercraft.com/teamtalk/showthread.php?t=47618 Pair of Wetsounds PRO-80s - Black http://www.mastercraft.com/teamtalk/showthread.php?t=47616&goto=newpost Wed, 16 May 2012 16:12:51 GMT I have two full functioning Wetsounds Pro-80's (black) for sale, $450 + Shipping, obo. PM me if interested. I'll be happy to email pictures, or to post pictures to this thread if there are requests.

If you haven't had the chance to experience wetsounds on your tower, you're really missing out. They were previously mounted on my '03 ProStar 197 mini zeroflex. ]]> aaron. http://www.mastercraft.com/teamtalk/showthread.php?t=47616