PDA

View Full Version : used mastercraft parts


matt
06-29-2006, 09:42 AM
Does anyone know of a place that has older mastercraft parts, salvage boats etc? I am need of a ski pylon for a 95 maristar 225VRS as well as a trailer for it. I would also like a black bimini top. Thanks for helping! I am located in Indy but am willing to travel if necessary.

east tx skier
06-29-2006, 11:07 AM
Welcome, Matt. I think there was a thread about this a couple of weeks ago. Long story short, not a whole lot of salvage out there for it though from what I remember. You could probably get a replacement pylon from a dealer if you didn't mind spending the cash. Bimini, too.

I'll see if I can dig up the thread.

erkoehler
06-29-2006, 11:14 AM
Matt, most dealerships could get you a trailer made for that boat. It usually takes 4-6 weeks to get the trailer though.

Rockman
06-29-2006, 02:41 PM
Hey Milwaukee / Wisconsin people,

Anyone know what ever happened to Kendor Marine which was located on Ryan Road just West of 94/41?

That used to be a good place to get parts, etc. and I do not believe it is there anymore?

Gofast
06-29-2006, 03:36 PM
MAtt,

My 95 225 VRS did not come with a pylon. All sking is from the tow point out back. Did yours come with a mounting point for the pylon?

Rob

matt
06-29-2006, 11:24 PM
Rob, the hardware is in the floor but i have to cut a hole to access it. Thanks

matt
06-29-2006, 11:25 PM
thanks tx!

east tx skier
06-29-2006, 11:34 PM
Here's that link.

http://www.tmcowners.com/teamtalk/showthread.php?t=9561&highlight=salvage

don king
04-12-2014, 04:14 PM
does anyone know where i can get the curved glass sections for my 1993 nari star 225 any help would be great call 706-444-9740 email jdking940@gmail.com thanks don

swatguy
04-12-2014, 04:40 PM
Great Lakes Skipper also is a good place to check. When dealerships close or need to dump old inventory they scoop stuff up.

mikeg205
04-12-2014, 04:47 PM
does anyone know where i can get the curved glass sections for my 1993 nari star 225 any help would be great call 706-444-9740 email jdking940@gmail.com thanks don


if you can't find it contact taylor made windshields... http://www.taylormadeproducts.com

pricey but you can get what you need if all else fails.

MBrandt-TT
04-12-2014, 07:40 PM
Here's a 1990 Tristar that might have some parts.

http://stockton.craigslist.org/bod/4391440582.html

Snipe
04-13-2014, 10:34 AM
Hey Milwaukee / Wisconsin people,

Anyone know what ever happened to Kendor Marine which was located on Ryan Road just West of 94/41?

That used to be a good place to get parts, etc. and I do not believe it is there anymore?

They're still here. Also Google Great Lakes Skipper, that's their warehouse.

don king
04-13-2014, 12:24 PM
I Talked To Great Lakes Skipper And Had No Luck Thanks I'll Take Any Info Thats Out There Sure Would Like To Get Fixed Don

don king
04-13-2014, 12:27 PM
I've Been To Great Lakes Skipper With No Luck I'll Try Anything Thanks For The Reply Don

don king
04-13-2014, 12:35 PM
I Called Taylor Made And They Have No Old Stock,drawing Or Mold They Don't Keep Anything That Old In Their History Files Thanks For The Try I'll Take Any Help Don

Snipe
04-13-2014, 01:39 PM
I've Been To Great Lakes Skipper With No Luck I'll Try Anything Thanks For The Reply Don

No luck as in finding your part, or finding their site. I typed in Kendor Marine and it came right up.