PDA

View Full Version : Loose panel on 2006 X2


jeffrpod
06-19-2006, 08:16 PM
Anyone else with an 06 X2 (or equivelent Maristar) notice that the plastic panel that contains the speaker along side the drivers feet is not secured? There doesn't appear to be any screws holding the panel to the fiberglass and as a result it really moves around while driving. Can some one else check to see if their's is the same way? Looks to me like there should be a couple screws in this thing.

Thanks!

erkoehler
06-19-2006, 08:23 PM
Are you talking about the front kick panel?

jeffrpod
06-19-2006, 09:25 PM
I guess that's what it's called (although I try not to kick it.) The forward portion of the panel, towards the dash, is completely unsupported and seems loose. Are other X2s like this?

erkoehler
06-19-2006, 09:31 PM
Not that I noticed in the one that I was in a couple weeks ago, but I'll verify on the one in the showroom tomorrow.

jeffrpod
06-19-2006, 09:39 PM
Thanks - appreciate it!

jeffrpod
06-21-2006, 09:45 AM
Erkoehler - Any luck checking on that panel? It just seems strange that I can reach my hand behind the panel, grab it and wiggle it around. I would think it needs to be secured, especially with the speaker mounted in it.

Thanks!
J

jeffrpod
06-26-2006, 10:54 PM
Anyone with an 06 X2 - could you check the kick panel on the drivers side? It seems strange to me that the foward portion of the panel is not screwed to the fiberglass. Anyone else notice this?

c640947
06-26-2006, 11:38 PM
I have not noticed this problem at all but I will check it tomorrow when I go by the boat storage.

dapicatti
06-27-2006, 12:10 PM
Anyone with an 06 X2 - could you check the kick panel on the drivers side? It seems strange to me that the foward portion of the panel is not screwed to the fiberglass. Anyone else notice this?

Taking ours into the dealer today to have some additional goodies installed.....will check then and let you know. I don't remember this being a problem. :confused:

jeffrpod
07-06-2006, 09:39 PM
Did anyone with an 06 X2 check the kick panel on the driver's side to see if the forward edge is loose? Also, my dash rattles/creaks alot where it meets up with the fiberglass along the side of the boat, anyone else's do this too? :confused:

I'd really appreciate a quick response as the dealer is coming out tommorrow to look at a couple other issues.

Thanks!

erkoehler
07-06-2006, 10:03 PM
The panel should definetly be tight, your probably missing a screw or clip somewhere. Have the dealer check it out.