PDA

View Full Version : Getting to the jets.


johny_Utah
06-15-2006, 12:18 AM
Where are the Jets located on a 4160? What was stock jet size? I am in Park City, Utah and I believe I am running way to rich.

Thanks,

J

Ryan
06-15-2006, 12:33 AM
I'll have to take a look tomorrow, maybe a pic with some arrows unless someone else beats me to the pic or a good description.

wesgardner
06-15-2006, 12:01 PM
Find your "List #" on the air horn, then reference the data below for jetting....

http://www.mortec.com/carbs.htm

Jets can be found by removing the fuel bowl(s)

Hope this helps

Wes

mgurley
06-15-2006, 01:20 PM
There will be a plate between the bowls and the carb it self...two jets per plate front and back...Be carefull if you get it too lean you will burn up a piston...