PDA

View Full Version : another 303 thread dang it


rodltg2
06-07-2006, 06:09 PM
ok i 'm sure this has been discussed , but usually when i see a 303 thread i dont read them. anyway , i tried a little 303 on my gunnels and it shined it up pretty good. is the same stuff i use on my seats good to use on my hull???

Upper Michigan Prostar190
06-07-2006, 06:10 PM
Ask the "CZAR" of 303 (cough, cough, Eastie) ;) :uglyhamme :uglyhamme

Hoosier Bob
06-07-2006, 06:16 PM
I wondered the same and after Stevo137's (I believe) comment regarding turning vinyl pink I decided to test a spot and see. The spot I tested appears fine but I am going to wait a week or two just to be sure. :D My answer may take awhile! ;
PS I have treated all of the fiberglass. AD says SPF 45 for your boat!

east tx skier
06-07-2006, 06:19 PM
You can use it on your hull. I usually don't bother with it on the hull though. I think when it was discussed at length before, the consensus was to use it on the hull, then apply wax afterwards. Memory could be fading though.

Mi.mc
06-07-2006, 07:10 PM
. I think when it was discussed at length before, the consensus was to use it on the hull, then apply wax afterwards. Memory could be fading though.

just read it, you've got it right

mitch
06-07-2006, 07:58 PM
http://www.wakeworld.com/MB/Discus/messages/3183/328657.html

88 PS190
06-07-2006, 08:27 PM
this product called Nu Finish works pretty well at leaving a nice shiny bullet proof wax over your hull. UV protection, and its designed to be a once a year car wax... they say something like 50+ automatic car wash cycles before rewaxing is needed.

But the 303 does work on fiberglass, i find it to appear a bit streaky, which they say wet down and then dry, but the wax just doesn't do that to me.