PDA

View Full Version : need help with pulling my tranny


blackbeauty02
05-31-2006, 08:19 PM
i'm trying to pull my transmission so i can take it to a shop and get it worked on. how on earth do i get the drive shaft to come loose so i can pull the tranny? we've taken all the bolts off and can't figure out how to get the driveshaft disconnected. thanks guys

6ballsisall
05-31-2006, 08:22 PM
i'm trying to pull my transmission so i can take it to a shop and get it worked on. how on earth do i get the drive shaft to come loose so i can pull the tranny? we've taken all the bolts off and can't figure out how to get the driveshaft disconnected. thanks guys

It should be pretty easy. 4 bolts on the coupler and the trans and driveshaft should seperate from each other by hand. Unbolt those 4 bolts and then push the driveshaft back towards the stern, it should break look pretty easily. Thats it.

Don't forget to somehow prop up the motor when you take the trans out. The trans actually holds the back of the motor up and with out the trans in there the motor will fall in the back.