PDA

View Full Version : location of motor box stops on 84


dichdoc
05-30-2006, 04:25 PM
Anyone able to take some measurements of where the little blocks go that keep the motor box in place. I seem to have forgotten that step when replacing the carpet. It an 84, Thanks in advance. TB

Cloaked
05-30-2006, 04:34 PM
Anyone able to take some measurements of where the little blocks go that keep the motor box in place. I seem to have forgotten that step when replacing the carpet. It an 84, Thanks in advance. TBPlace your rear floor section in first, as it may deviate 1/8" or so from where it came out. Then place the engine cover onto the pins and fit the stops from that. Place the stop on the floor and lower the cover down, until you clear it. Repeat as necessary for each stop.

brianaw26
05-30-2006, 06:43 PM
just place the engine box with the hinges screwed down. Let the boxstay there for a day or so. When you lift the engine ox off the carpet there will be a line where the box was hitting the carpet, place the stops there. Easy as that I just did that too.

dichdoc
05-30-2006, 06:51 PM
That makes perfect sense! I'll do it tomorrow. TB