PDA

View Full Version : Top of Tower Light....... Help!!!!!


rabooze
05-16-2006, 11:40 PM
I need to find a replacement for the tower light that goes on the top of a ZeroFlex tower, '02. Without elaborating, I will say that I now know what bridge I can pass under if my tower was 3" shorter. I need a plastic case replacement and bulb. Any help? Thanks in advance.

sand2snow22
05-16-2006, 11:50 PM
That's unfortunate....I lost my plastic case trailering, picked up a new one from the dealer.....They should have a bulb, too....

erkoehler
05-17-2006, 02:17 AM
MasterCraft dealer should be able to help you out.....Try Chicago MasterCraft :) 847-973-0800 or MYMC is a bit closer.

prostar205
05-17-2006, 03:42 AM
I've replaced 2 of those plastic lens in 1 year. They keep bouncing right off the boat. At $12 each, it getting a little spendy.

jlf
05-17-2006, 08:55 AM
We lost one also trailering, picked one up from dealer, they covered it under waranty. Not sure if the bridge thing is covered under warranty though ;)

#47of100TeamMC
05-17-2006, 09:17 AM
Wow, your lucky your tower didn't need to be 4" shorter to pass under the bridge... you just might be scraping your whole tower off the pavement...:eek:

rabooze
05-17-2006, 09:21 AM
Fortunately, I knew it was going to be close so I was barely moving when it happened. Problem was by the time I realized it was not going to make it, I couldnt stop the forward momentum of the boat. I guess some things you have to live and learn. :toast:

Workin' 4 Toys
05-17-2006, 10:29 AM
In the old bling section of the old mastercraft site they had LED replacements for those lights. Dealers should be able to get them.
Otherwise just get the same and put a tiny dab of clear adhesive or the like on the locking clip to keep it from unscrewing on its own. But a small enough amount that you will still be able to open it when you want in case the bulb burns out.