PDA

View Full Version : Drive Shaft and Prop size on an 06 X2 -need help


c640947
05-02-2006, 01:25 PM
I think we hit something with the prop Sunday and I have a spare from my Prostar 190 that I want to test. Well first I am going to double check the X2 as is to make sure it still vibrates. Then if it does we were going to swap props and try it again. If it still vibrates the boat has to go in for work, if it doesn't stock prop just needs to be fixed.

My question is: does anyone know the sieze of the drive shaft? I don't know if my spare prop will fit. Also out of curiosity, does anyone know the size and pitch of the stock prop? I got the MCX motor.

Any help is appreciate since after two calls the dealer still doesn't have the info for me. Should be an easy question, right?

I already searched this site and read the prop test faqs and couldn't find anything.

Thanks in advance.

Andrew

c640947
05-02-2006, 01:29 PM
As soon as I was done typing they called me back. I have part of the info.

13.7 x 17

I am assuming one is the pitch and the other is the blade length?

I still don't have the size of the shaft, but the dealer said the hole diameter is written on each prop so I shouldl easily be able to tell if it will fit.