PDA

View Full Version : Replacement Gauges for '00 PS190


ndavio51
06-03-2014, 02:43 PM
Hello All,

I'm looking for a set of replacement gauges for my '00 PS 190. I talked to my local dealer and they are Medallion Gauges which are hard to come by for my year. A few of the domes on the gauges are cracking and on of the bezels has broke in two pieces.

Anyone have an idea of where to get a set?

Jeff d
06-03-2014, 02:55 PM
I don't want to steer you wrong but I think you can buy a gauge set from just about any Mastercraft boat that came with Medallion gauges:
http://www.ebay.com/itm/MASTERCRAFT-BOAT-GAUGE-SET-5-GAUGES-2005-X2-X-2-MARISTAR-MEDALLION-MASTER-CRAFT-/221285200239?pt=Boat_Parts_Accessories_Gear&hash=item3385a0316f&vxp=mtr

You probably have a speedometer on the PS190 though so that may not do. There are plenty of sets on ebay though, many of them new.

Here's another option that I'm working on:
http://www.mastercraft.com/teamtalk/showthread.php?t=60338

I should have better information, pictures and what not in a week or so.

Jeff d
06-03-2014, 02:57 PM
Oh, also most of the newer boats have a billet dash with the gauges behind it. So, they have no bezels included. That might be a problem for you since you need the bezels. Here's a set with them:
http://www.ebay.com/itm/MEDALLION-MASTERCRAFT-9-PIECE-WHITE-SPORT-BOAT-GAUGE-SET-/400305333328?pt=Boat_Parts_Accessories_Gear&hash=item5d340ea450&vxp=mtr

ndavio51
06-03-2014, 03:04 PM
Actually the speedo is in good condition and the smaller gauges are the ones that need to be replaced. When I talked to the service department at the dealer he mentioned that the numbers on the gauges needed to match up because the gauges might not communicate with the computer/black box

Jeff d
06-03-2014, 03:14 PM
Maybe someone else will chime in with specific experience/knowledge. Anecdotally I've heard of others buying significantly newer gauges off ebay and they worked with older MDCs (The "black box") but it might be a bit of a gamble.

If you can't find gauges for your specific vintage of MDC then your best option may be to get rid of it and replace the gauges with aftermarket true analog gauges. This is what I'm doing as soon as my new gauges arrive. I have actual functional problems though. It would kinda suck to have to do it just for cosmetic reasons.