PDA

View Full Version : X10 Ballast not working


aaronmoorex10
04-28-2014, 10:09 PM
I have a problem. The ballast pumps run when the switch is turned on but it is not moving water. What could be the problem? Thanks.

KnoxX2
04-28-2014, 10:25 PM
Sounds like a bad impeller. Find the pump and remove the small cover plate. Take a look at your impeller. These should be changed every 2 years.

Cain0725
04-28-2014, 11:04 PM
what year do you have? I had same problem last year, replaced impellers, no help, finally figured out there is a one way valve in hose before it exits the boat. Seals had dry rotted in one, letting the system suck air, cost 15 dollars to fix. I had one for each pump and replaced all three.

bturner2
04-29-2014, 09:28 AM
make sure the valves are in the open position