PDA

View Full Version : Fuel sensor unit - 1989 Prostar 190


MC 1989 Prostar 190
10-28-2013, 03:08 PM
I just purchased a 1989 Prostar 190 and restore it. So far everything works quite well. I have problems with the fuel sensor unit though. As you can see on the pix its quite rusty, dirty and the sensor itself has a hole so probably water or fuel entered, the coil oxidized and now i have no more signal.
Has anyone had to replace the fuel sensor unit or parts of it? Any addresses you can find original parts?
Thanks alot for your help

catamount
10-30-2013, 06:06 PM
Lots of us have had to replace those senders. Give the guys at SkiDim a call - they will have exactly what you need.

http://www.skidim.com/

liledgy
10-30-2013, 10:00 PM
I just put a new gas tank in an 87 prostar. I believe we would have the same or very similar tank. If so it's a mueller brand tank. You should be able to get parts from ski dim or Iboats.

Wingnut
11-01-2013, 05:10 PM
I just redid a complete fuel tank- 38 Gallon Moeller FT3223- SKIDIM was great with sending unit and I called Moeller direct and their folks sent me all the undated hardware/pick ups etc for my tank- Elbows ,plates fittings etc -free- Call their technical folks- Heather helped me out. Good Luck

MC 1989 Prostar 190
11-05-2013, 01:05 PM
Hey guys,

Thanks a lot for your help! I gonna check that out!

Cheers!

mikeg205
11-05-2013, 01:11 PM
www.isspro.com has a number of them as well

http://isspro.mybigcommerce.com/fuel-level-senders/