PDA

View Full Version : Mastercraft sign


Foster20
10-01-2013, 04:56 PM
I cut some more of these today. $60 shipped to lower 48. Made from 1/8" laser grade aluminum. They are around 17.25" tall x 15.5" wide. Cut on a 4000 watt Trumpf laser cutter. PM if interested.
http://www.mastercraft.com/teamtalk/picture.php?albumid=950&pictureid=5687

Previous thread that was really in the wrong section...
http://www.mastercraft.com/teamtalk/showthread.php?t=57604

Cloaked
10-01-2013, 08:06 PM
Nice looking gadget. Have you considererd the old school font?

Private message to you.

.

JRW160
10-01-2013, 08:12 PM
That looks awesome

AlbertaSurfer
10-01-2013, 08:17 PM
I'd buy one of the Stars and Stripes font for sure

Foster20
10-01-2013, 10:46 PM
It's funny I figured I might get that request. I'll work on it. Yall want just that font alone or for it to be inside the badge?

AlbertaSurfer
10-01-2013, 10:49 PM
Just the font, I say

Foster20
10-01-2013, 11:48 PM
Can do!

Foster20
10-02-2013, 12:04 PM
Here is the first initial concept rendering of the old school MC logo. It can be done where the letters are the sign, or there is a sign with the letters cut out... I usually like the letters being the sign but I am not sure this will work will like that. When I have time I will also put "competition ski boat" on there. Might do different versions to see what looks best and to see what anyone would be interested in. I won't actually cut anything until the design gets locked in...
Any thoughts or suggestions?
http://www.mastercraft.com/teamtalk/picture.php?albumid=950&pictureid=5694

Foster20
10-02-2013, 09:47 PM
Any feedback on this?

thatsmrmastercraft
10-02-2013, 09:54 PM
I think you are correct on leaning towards the reverse cut version of this.

Foster20
10-02-2013, 10:02 PM
Yeah I'll reverse tomorrow and add the other text.

197 TT
10-03-2013, 07:24 AM
I received my shield yesterday, it looks awesome, high quality, thanks!

Foster20
10-03-2013, 08:05 AM
You are welcome! Glad you are happy with it.

Foster20
10-03-2013, 06:47 PM
Here is how it turned out. It is 34" x 9" and I am thinking of doing it out of .08 Aluminum to cut some cost. Still don't know the price, but will work on that tomorrow.
http://www.mastercraft.com/teamtalk/picture.php?albumid=950&pictureid=5695

If you contact me for one of these signs be sure to mention either the badge logo or the old school one...

Foster20
10-04-2013, 08:37 AM
Here is a custom one that I was asked to do.
http://www.mastercraft.com/teamtalk/picture.php?albumid=950&pictureid=5697

Double D
10-04-2013, 09:01 AM
Here is a custom one that I was asked to do.
http://www.mastercraft.com/teamtalk/picture.php?albumid=950&pictureid=5697

VERY COOL!!!

scott023
10-04-2013, 09:05 AM
VERY COOL!!!

X2. Great work.

Foster20
10-04-2013, 11:32 AM
http://www.mastercraft.com/teamtalk/picture.php?albumid=950&pictureid=5698

Here is the one that scott023 requested...

cbryan70
10-04-2013, 11:48 AM
http://www.mastercraft.com/teamtalk/picture.php?albumid=950&pictureid=5698

Here is the one that scott023 requested...

I knew it would not take long for him to order one. Looks great

Foster20
10-04-2013, 11:55 AM
And then there is a front license plate. Against my better judgement I am posting it to see if anyone would be interested in one. I have quickly accumulated a lot of different options that will no doubt be a pain to schedule and keep up with, but I know we all love to show off our MC pride.
http://www.mastercraft.com/teamtalk/picture.php?albumid=950&pictureid=5699

Double D
10-04-2013, 11:58 AM
And then there is a front license plate. Against my better judgement I am posting it to see if anyone would be interested in one. I have quickly accumulated a lot of different options that will no doubt be a pain to schedule and keep up with, but I know we all love to show off our MC pride.
http://www.mastercraft.com/teamtalk/picture.php?albumid=950&pictureid=5699

Very cool!! Unfortunately in Ohio we have a front plate... :(

thatsmrmastercraft
10-04-2013, 12:07 PM
Very cool!! Unfortunately in Ohio we have a front plate... :(

Same in MN.

scott023
10-04-2013, 01:19 PM
Same in MN.

We don't in Alberta. But I'm a big fan of the clean, no plate, no holder look.

scott023
10-04-2013, 01:20 PM
I knew it would not take long for him to order one. Looks great

I haven't ordered anything... yet. If I order these, I'm going to make sure I have a home for them first. :D

cbryan70
10-04-2013, 04:15 PM
Desk at the office? Have him put an open and closed sign on the bottom and use it at the store

scott023
10-04-2013, 04:21 PM
Desk at the office? Have him put an open and closed sign on the bottom and use it at the store

One for the office, family one for the garage at home I think. :D

Skir68
10-06-2013, 11:40 AM
VERY COOL! I'd be interested in Old SKOOL font!

Foster20
10-07-2013, 05:34 PM
Anyone interested in this one. Could scale it to almost any size. Could do some small ones for pretty cheap, or some larger ones...
http://www.mastercraft.com/teamtalk/picture.php?albumid=950&pictureid=5709

clrussell
10-07-2013, 05:39 PM
Matt, can you make that last one for like a license plate size? Maybe have 2 pieces that bolt together for coloring?

Foster20
10-07-2013, 05:44 PM
This one?
http://www.mastercraft.com/teamtalk/picture.php?albumid=950&pictureid=5687

clrussell
10-07-2013, 07:08 PM
No the one with the star in the middle and lettering over it. Post above mine

Cloaked
10-07-2013, 09:21 PM
My original intent when I suggested the old font. This logo plaque with old font.

This one?
http://www.mastercraft.com/teamtalk/picture.php?albumid=950&pictureid=5687

Foster20
10-07-2013, 10:25 PM
@clrussel I've got that drawn up already the back plate could just be painted black or whatever color you want.
@Cloaked I can do the old school font in the badge pretty easily since I've already drawn it up.

scott023
10-07-2013, 10:42 PM
My original intent when I suggested the old font. This logo plaque with old font.

That would look sharp.

scott023
10-07-2013, 10:43 PM
Matt, did you send mine out today? Have a tracking number? I get exited when things are on their way. :D

Foster20
10-07-2013, 11:03 PM
I couldn't get it on the laser today but I'll hopefully get it shipped shipped tomorrow and get you a tracking number. I had the regular one already, it's just the 1-off part that needs cut. Will keep you posted.

scott023
10-08-2013, 12:16 AM
I couldn't get it on the laser today but I'll hopefully get it shipped shipped tomorrow and get you a tracking number. I had the regular one already, it's just the 1-off part that needs cut. Will keep you posted.

Ok. Thanks Matt.

mikeg205
10-08-2013, 12:18 AM
Ok. Thanks Matt.

a "all I want is my darn sign thread" in the making?

scott023
10-08-2013, 12:32 AM
I thought they were going out today... I have some patience. I was just checking to see if it went out. I'm not worried. 8p

clrussell
10-08-2013, 05:52 AM
Ok thanks Matt, I'll let ya know when I'm ready for a couple

Foster20
10-08-2013, 05:19 PM
My original intent when I suggested the old font. This logo plaque with old font.


As requested and as promised. :)
http://www.mastercraft.com/teamtalk/picture.php?albumid=950&pictureid=5713

Cloaked
10-08-2013, 05:25 PM
As requested and as promised. :)
Now you're talking.... However, all of the other options you have offered up are attractive as well... Thanks for the work....

.

Foster20
10-08-2013, 07:13 PM
Yeah, no problem. Thx for the complement.

Cloaked
10-08-2013, 08:11 PM
Yeah, no problem. Thx for the complement.
No prob.

Foster20
10-10-2013, 01:13 PM
Here is the old school font in the badge. What do you think of it Cloaked?
http://www.mastercraft.com/teamtalk/picture.php?albumid=950&pictureid=5717

russlars
10-10-2013, 02:09 PM
Can you make these out of stainless steel?

Foster20
10-10-2013, 02:58 PM
Yeah, I've got some thin stainless (.06") that I could cut any of the patterns out of. I can do the stainless for cheaper too since it is out of the thinner material and I have some that I need to get rid of.

Cloaked
10-10-2013, 05:31 PM
Here is the old school font in the badge. What do you think of it Cloaked?
http://www.mastercraft.com/teamtalk/picture.php?albumid=950&pictureid=5717
That's the ticket. I'm waiting on PayPal to replenish my account so I can send you money. That is what I am looking for...

An old Chinese Proverbist recently said, "winner, winner, chicken dinner."

That floats my boat... :D

.

scott023
10-10-2013, 06:18 PM
That's the ticket. I'm waiting on PayPal to replenish my account so I can send you money. That is what I am looking for...

An old Chinese Proverbist recently said, "winner, winner, chicken dinner."

That floats my boat... :D

.

Really? I wasn't sure where that had originated. :uglyhamme

Chred
10-11-2013, 11:59 AM
Thanks Matt! My sign arrived this morning and it looks awesome!

Foster20
10-11-2013, 12:14 PM
Sweet, glad you are happy with it!!

Foster20
10-15-2013, 03:18 PM
I am making these custom named signs too if anyone would be interested. They look great hanging on an interior wall and make great wedding/housewarming gifts. Pm me if interested...
http://www.mastercraft.com/teamtalk/picture.php?albumid=950&pictureid=5726

gsxrjtt
10-16-2013, 09:58 AM
hey can you cut out same exact pattern with plexi glass to go under the metal pattern ?? Thinking of back lightening it with led some how. that is the mastercraft logo ?

Foster20
10-16-2013, 10:46 AM
We only use our lasers for metals... That would be cool though.
I could probably get it done by sourcing the plexi glass part. PM me and we can figure out the details.

Cloaked
10-16-2013, 08:35 PM
PayPal to you. Thanks for offering up your skills and willingness.

As requested and as promised. :)
http://www.mastercraft.com/teamtalk/picture.php?albumid=950&pictureid=5713

Foster20
10-16-2013, 09:36 PM
Got it cloaked. My pleasure bud!

Cloaked
10-16-2013, 09:43 PM
Got it cloaked. My pleasure bud!
The original one you cut for me is just fine. Thanks again,....

Fletchx7
10-16-2013, 10:06 PM
PM sent

Foster20
10-16-2013, 10:23 PM
@fletchx7 pm replied

scott023
10-17-2013, 01:34 PM
Recieved my signs. Thanks Matt.

Kweisner
10-17-2013, 01:39 PM
Got mine last weekend--looks great! Thanks Matt.

BrooksfamX2
10-17-2013, 03:13 PM
Whatcha gunna do with them??

Foster20
10-17-2013, 04:53 PM
You're welcome Scott!
Glad it arrived safely and you are happy with it Kweisner!

turbofresh
10-18-2013, 12:30 PM
PM sent.

Foster20
10-18-2013, 07:11 PM
@turbofresh, replied!

Kweisner
10-21-2013, 07:28 PM
102434

Painted a background on the garage wall to give it a little pop.

102435

Foster20
10-21-2013, 08:16 PM
Looks awesome hanging on your wall. Still haven't got mine put up. Keep seeling the one I cut for myself. Lol
I could have made you a matching backplate and powdercoated it black. Your way is cheaper though:)

Foster20
10-23-2013, 04:01 PM
I have had a few folks ask if I am still doing the signs. Just letting anyone interested to know that I am making them. Also making other cutomized signs and doing freelance CAD work. If there is something that I can help you with just let me know.
thanks,
Matt

turbofresh
11-08-2013, 12:19 PM
Biggup to Matt for the killer signs i received in the mail today. He did an awesome job on them!
thanks again matt!

Foster20
11-09-2013, 04:51 PM
You're welcome man, glad you like them.

clrussell
12-01-2013, 06:37 PM
Matt I'm ready for one and a costom one if ya can. I'll send ya a pm

clrussell
12-13-2013, 08:33 AM
Got an idea for ya. http://img.tapatalk.com/d/13/12/13/7uru9y9y.jpg

I know there are copyright things but you could do the same concept and offer different boats. (205v style, pickle fork boats, classics, etc.) I would buy one for the right price!

Double D
12-13-2013, 09:22 AM
Got an idea for ya.

I know there are copyright things but you could do the same concept and offer different boats. (205v style, pickle fork boats, classics, etc.) I would buy one for the right price!

1994 PS 205 please!! With a Monster Tower... :rolleyes::rolleyes:

clrussell
02-07-2014, 09:01 PM
Bump so can be found by another member

turbofresh
04-21-2014, 01:23 PM
Here is what we did with our MC signs. they turned out amazing!

texasjet
04-22-2014, 01:48 AM
Here is what we did with our MC signs. they turned out amazing!

That looks AWSOME. We got a shield also and have kinda struggled with how best to give it a proper use. This looks very nice. Thanks for sharing n


Sent from my iPad using Tapatalk HD

Foster20
05-28-2014, 09:00 AM
That looks awesome turbofresh!

TayMC197
05-28-2014, 09:13 AM
Didn't think about those but that would be an easy water jet program. Might have to play around a little.

5 O's X-10
05-28-2014, 10:33 AM
Matt.. Count me in for one lie TurboFresh... PM me payment info.

Sydney Skier
05-28-2014, 10:42 PM
That's the ticket. I'm waiting on PayPal to replenish my account so I can send you money. That is what I am looking for...

An old Chinese Proverbist recently said, "winner, winner, chicken dinner."

That floats my boat... :D

.

This looks HOT!!!!!! Interested in going Global??? PM Sent

Foster20
06-10-2014, 02:41 PM
Hey guys, I have had several people recently interested in the signs. Just wanting to let you know that I am still doing them. PM me with your requests.
Thanks,
Matt

Sydney Skier
06-11-2014, 05:45 AM
Matt I haven't forgotten getting paid monthly makes life a difficult

Foster20
06-12-2014, 09:30 AM
No worries Sydney Skier. When you get ready just let me know.

Sydney Skier
06-12-2014, 08:23 PM
Cheers mate I will.

Foster20
06-18-2014, 08:42 AM
http://www.mastercraft.com/teamtalk/picture.php?albumid=950&pictureid=6443

I had a request for this one. Thought some of you guys might be interested in it.

Wakerider16
06-18-2014, 08:48 AM
I may be sending you a PM next week. Still doing them for $60 shipped?

Ironhorse
06-18-2014, 09:11 AM
I got mine this week Matt. It looks great!!! Thanks

hhp364d
06-18-2014, 07:09 PM
Foster20,
Sent a PM about a sign....

HHP

Foster20
06-19-2014, 05:54 PM
Glad to hear @Ironhorse.
Yeah, the regular Mastercraft signs are $60, but the custom ones are $75.

pettingeres
07-09-2014, 01:21 AM
Are you still doing the signs?

gsxrjtt
08-01-2014, 08:17 PM
whats the biggest you can make them ?

jwithers7
08-02-2014, 02:45 AM
I'll second the aforementioned comment, definitely interested as well!

Foster20
08-04-2014, 09:50 AM
Only interested in doing the current size. If I increase the size I have to adjust pricing for the larger sized sign and I am limited on free time as it is.
Thanks

gsxrjtt
08-29-2014, 04:23 PM
HUGE and I mean HUGE thanks and bad *** job to Foster20 for making us out new signs.. Will be 2 sided with a solid middle piece.. We are installing the led lights now will post more pics later

117237


Sent from my iPhone using Tapatalk

sallen
08-30-2014, 08:23 PM
That is very impressive!