PDA

View Full Version : Gelcoat lightly oxidized - product/pad recommendations


bochnak
09-30-2013, 09:49 AM
I will be using a PC 7424xp and it would be great if I can only make 1-2 passes. I need a little advice on what product and pads to use.

Here are a few pics:

https://lh6.googleusercontent.com/-_DhAYYrOH4M/UkhxfT6V_7I/AAAAAAAABaQ/5p8zYSH2e9s/w974-h648-no/DSC_5801.JPG


https://lh3.googleusercontent.com/-gedipHP9_cw/UkhxlDA3ccI/AAAAAAAABag/LtB5xV9rDRA/w974-h648-no/DSC_5804.JPG

mikeg205
09-30-2013, 09:56 AM
Do a search on this topic - many threads with what you are looking for.

bochnak
10-02-2013, 07:12 AM
Do a search on this topic - many threads with what you are looking for.

Searched and will follow this guide:

http://www.mastercraft.com/teamtalk/showthread.php?t=46985&highlight=compound

alfie623
10-09-2013, 05:16 PM
I just did mine with the Meguire's kit, Meguire's DA power attachment for my cordless drill and their pads. It took some time but I was real happy with the results. I bought smartly going here and there for the equipment and the polishes and I want to say I'm into this for about $100 plus the cost of the new decals which needed to be replaced anyway. I bet your boat is going to clean up nicely as mine was worse then yours looks.

bochnak
10-10-2013, 07:13 AM
I just did mine with the Meguire's kit, Meguire's DA power attachment for my cordless drill and their pads. It took some time but I was real happy with the results. I bought smartly going here and there for the equipment and the polishes and I want to say I'm into this for about $100 plus the cost of the new decals which needed to be replaced anyway. I bet your boat is going to clean up nicely as mine was worse then yours looks.

Thanks. I'm 90% done buffing the boat. Hopefully I'll finish tonight and post some pics. I used a rotary with a wool pad and 3M rubbing compound followed with perfect it polish and foam pad.