View Full Version : Will X1 (205v) Fit on Moomba LSV trailer?

09-07-2013, 10:30 PM
I found a galvanized 2008 moomba trailer and I was wondering if the X1 would fit. Maybe someone else has tried. I can get the trailer for a good deal and 205V trailers seem hard to find especially galvanized.

09-13-2013, 12:38 PM
I would be carefull, The hulls are going to be different, the concern I would have is the overall geometry. Imaging driving your X1 onto a LSV trailer and feeling the front of the hull hit a steel cross brace because the forward bunks are not close enough together. To be sure, you would have to somehow have the boat lifted onto the trailer to inspect how well it supports the boat. Remember that the bunks are spaced so that they strattle the ridges of the hull (follow the contour).

09-13-2013, 02:43 PM
Thank you! I think the bunks are too far apart so I will keep looking.

09-13-2013, 04:48 PM
I sold a Moomba Outback and have a MC 205. I did not have to change the bunks on my lift. They were measured off of the Moomba trailer. The LSV is a foot longer than my boat was and may be a different width.

Do some measuring before you dismiss it totally. You may call Boatmate, that is who makes the Moomba trailers.