PDA

View Full Version : 03 X30 fuel sending unit


SkiMC
08-26-2013, 09:53 AM
Has anyone had any issues with their gas gauge on a 03 X30 not working properly? I have been working with the local MC dealership trying to get my gas gauge fixed for the last 3 months. They have tried everything, replaced it twice, added a new part per the manufacturer of the stock sending unit and still nothing. It shows full all the time... Any suggestions would be greatly appreciated.

Thanks!

CC2MC
08-26-2013, 03:31 PM
There is a thread on here about testing a sending unit. All you really need is a volt meter and it will be able to read the signal of the sending unit. More than likely it is not the gauge itself. Check out the thread below.

http://www.mastercraft.com/teamtalk/showthread.php?t=38453

SkiMC
08-26-2013, 03:36 PM
I will check it out. Thanks.

nickespi
08-26-2013, 03:42 PM
Does yours read full all the time until it's empty?

SkiMC
08-27-2013, 09:38 AM
Yes it reads full all the time. Don't know if it goes to empty when bone dry because have not let it get there yet.

mobilecascade
08-28-2013, 02:26 PM
Thanks for asking as ours (02 XStar) just started doing the same thing these last few weeks, after dealer looked at it

g-Dog
08-28-2013, 02:42 PM
If it's the same type of sending unit that's in my '02 205v there should be adjustment screws on the top.

http://www.centroidproducts.com/3wire.htm

CC2MC
10-16-2013, 02:15 PM
SkiMC, You get this issue resolved?