View Full Version : LTR serpentine belt

08-05-2013, 12:17 PM
Does anyone know the automotive equivalent of the serpentine belt on a 99 LTR? I'm heading out to the lake for a week and thought i should maybe bring along a belt just in case. There are no marine dealers anywhere close so i'll need to find one for a car that fits.

08-05-2013, 01:56 PM
Napa has one that I use. I'll get you the belt number in a min

08-05-2013, 02:33 PM
NAPA brand Micro-V 060480

I was throwing belts early in the season. After a new idler, water recirc, and raw water pump, I was still slipping. I figured after swapping brands 3 or 4 times that I was likely running a belt too long. Walked into NAPA and told them to give me a belt 1" shorter than the one I had. This is the belt I've been running since with no issues.

08-06-2013, 01:18 AM
Thanks alot, exactly what i was looking for.

08-06-2013, 01:35 AM
No worries, have a good trip!

I'm headed out to Sask myself this weekend for 10 days. Going to Lac Des Isles

08-10-2013, 09:47 AM
Hmmm. I tried this belt and it is too short to get on. I measured my original and the NAPA and the NAPA belt is about 1/4" shorter than the belt I ordered from Skidim.

Tried as I might, the NAPA 060480 would not go on my 1999 Maristar with LTR engine.

08-10-2013, 11:38 AM
There was a recall on the main pulley and some were replaced with a larger pulley. As a result those that were modified no longer take the original spec belt. I have a 2000 ltr with the larger pulley. Will look for the belt number and post shortly.