View Full Version : Multifunction Gauge -- can it be calibrated?

07-28-2013, 10:12 AM
I have an 05 X2 with the multifunction LED readout on the tach. Just wondering if the temp (lake and air) and depth can be calibrated in any way? Owner's manual has nothing, and searches here reveal nothing, so I'm thinking the answer is no.
(Just to be clear, I'm NOT referring to the speedo calibration.)

07-29-2013, 12:37 PM
Have you tried holding the select switch down? With key on, engine off - hold the button for about 3 seconds - your gauges will all check and reset. I'm not aware of a calibration process - My lake temp is stuck in Celsius.

07-29-2013, 01:40 PM
Will try that. I know that the water temp comes from the paddle wheel and the air temp sensor is under the helm somewhere.